2,300+ Design Engineer Jobs in Malaysia | Job Vacancies | July 2026 | Ricebowl
显示2,331个工作的结果
"design engineer"
不要错过任何 Design Engineer 的新工作机会
管理提醒
Lattice Semiconductor
Undisclosed
- Hands-on experience in SoC and/or FPGA RTL design, testbench development, logic verification, timing closure and debugging in accordance with functional safety requirements.
- Demonstrate technical ownership of safety related SoC and/or FPGA Soft IP development and verification with proven ability to generate audit ready Functional Safety evidence in compliance with IEC 61508, ISO 26262 or other safety standards.
- Working knowledge of any FPGA primitives such as embedded block RAM, DSP blocks, PLL, oscillators, I/O Gearing, configuration/security or power related silicon features is a plus. ...
Posted
12 days ago
Ethos Search Associates Pte Ltd
SGD5,000 - SGD10,000 每月
Singapore
- Work closely with other groups like Analog Design, Systems, Applications and Production in determining architecture and specification of the products.
- Bachelor/Masters Degree in Electronics/Electrical/Computer Engineering with 1 year or more experience
- Good experience and knowledge in design flow from Netlist to GDS, Synthesis, layout, Floor Planning, route , STA, CTS, RC Extraction and correlation ...
Posted
14 days ago
RECRUIT EXPERT PTE. LTD.
SGD4,000 - SGD7,000 每月
Singapore
- Collaborate with mechanical, PCB, manufacturing, procurement, and quality teams to support smooth transfer into production.
- Ensure compliance with international safety and environmental standards (IEC, UL, RoHS, REACH) while promoting ISO 9001 practices.
- Degree in Electrical/Electronic Engineering or related discipline. ...
Posted
12 days ago
Undisclosed
Hong Kong
- Frequent travel and stay outside Hong Kong are required
- Proficiency in both written and spoken English, Cantonese, and Putonghua
- Responsibilities ...
Posted
12 days ago
SGD7,000 - SGD7,000 每月
Singapore
- Drive functional coverage closure, assertions, and regression analysis.
- Debug RTL and verification failures across simulation/emulation environments.
- RTL designers ...
Posted
a month ago
DIRECT SEARCH ASIA PTE. LTD.
SGD6,000 - SGD6,000 每月
Singapore
- Perform electrical load analysis and fault calculations.
- Prepare technical specifications, engineering drawings, and documentation.
- Review vendor drawings and technical submissions to ensure compliance with project requirements. ...
Posted
19 days ago
Undisclosed
West Region, Singapore
- Ensure all engineering works, designs & detailing are structurally safe, practical, economy & buildable and comply with the relevant statutory regulations, client requirements, Standards & Codes of Practice.
- Manage project stakeholders, clients, design & drafting team, and other relevant parties to ensure ST approvals, Permit to Start Work, relevant Authority Approvals, As-Built Clearances, TOP and CSC are obtained timely.
- Degree in Civil & Structural Engineering. ...
Posted
a month ago
SGD5,000 - SGD5,000 每月
Singapore
- Ensure designs are manufacturing-ready, supporting integration into production with a focus on scalability, reliability, and cost efficiency.
- Define performance metrics, monitor development progress, and prepare technical reports and documentation for continuous improvement.
- Degree in Mechanical/Mechatronics Engineering or equivalent ...
Posted
10 days ago
ASEM - Advanced Semiconductor Academy Of Malaysia
Undisclosed
Singapore
- s.Operate with minimal guidance on daily tasks, requiring only general instructions for new assignment
- s.Troubleshoot and resolve network issues to ensure minimal downtime and service disruption
- ent:Manage and optimize hardware technologies to maintain network performance and capac ...
Posted
12 days ago
Undisclosed
KL City
- s.Operate with minimal guidance on daily tasks, requiring only general instructions for new assignment
- s.Troubleshoot and resolve network issues to ensure minimal downtime and service disruption
- ent:Manage and optimize hardware technologies to maintain network performance and capac ...
Posted
12 days ago
Undisclosed
Singapore
- Develops and validates structural models to simulate and predict performance under various loading conditions
- Collaborates with multidisciplinary teams to integrate structural analysis results into overall project designs
- Prepares detailed technical reports, design documentation, and presentations for stakeholders ...
Posted
a month ago
STAFFLINK SERVICES PRIVATE LIMITED
SGD3,500 - SGD3,500 每月
Singapore
- Familiar with PV simulation software such as PVsyst and Helioscope.
- In addition to the above-mentioned duties and responsibilities, any other assignments given occasionally or daily by the immediate reporting officer
- Possesses minimum Degree in Electrical Engineering/Renewable energy-related field ...
Posted
18 days ago
SGD5,000 - SGD5,000 每月
Singapore
- Ensure designs are manufacturing-ready, supporting integration into production with a focus on scalability, reliability, and cost efficiency.
- Define performance metrics, monitor development progress, and prepare technical reports and documentation for continuous improvement.
- Degree in Mechanical/Mechatronics Engineering or equivalent ...
Posted
11 days ago
SANMINA-SCI SYSTEMS SINGAPORE PTE. LTD.
SGD6,500 - SGD6,500 每月
Singapore
- Design, deploy, and operate large-scale GPU-based compute environments, including optimizing network topologies like InfiniBand and Ethernet.
- Lead server validation and bringing up complex systems, including lab validation, SI/PI (Signal Integrity/Power Integrity) analysis, and debugging.
- Partner with software, datacenter engineering, mechanical and thermal, and vendor teams to ensure seamless hardware/software integration. Drive root cause analysis and corrective actions. ...
Posted
18 days ago
RECRUIT EXPERT PTE. LTD.
SGD4,000 - SGD4,000 每月
Singapore
- Collaborate with mechanical, PCB, manufacturing, procurement, and quality teams to support smooth transfer into production.
- Ensure compliance with international safety and environmental standards (IEC, UL, RoHS, REACH) while promoting ISO 9001 practices.
- Degree in Electrical/Electronic Engineering or related discipline. ...
Posted
12 days ago
OMNIVISION TECHNOLOGIES SINGAPORE PTE. LTD.
SGD5,000 - SGD5,000 每月
Singapore
- Develop testbenches, assertions, checkers, and block or subsystem-level verification environments to validate controller behavior, detection logic, configuration programming, fault response, and status reporting.
- Plan and execute functional verification for normal, corner, negative, and fault-injection scenarios, with adequate coverage of critical diagnostic behaviors.
- Collaborate with analog and mixed-signal designers to create or use behavioral models, stubs, and interface abstractions for realistic verification of failure mechanisms and observability paths. ...
Posted
18 days ago
OMNIVISION TECHNOLOGIES SINGAPORE PTE. LTD.
SGD7,000 - SGD7,000 每月
Singapore
- Experience in embedded C and assembly code programming
- Experience in analysis of power, timing and area
- Experience in at least one of scripting languages (e.g. Perl, Python, TCL, or Bash) ...
Posted
18 days ago
OMNIVISION TECHNOLOGIES SINGAPORE PTE. LTD.
SGD5,500 - SGD5,500 每月
Singapore
- Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
- Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
- Optimizing micro-architecture design for low power and area is required. ...
Posted
18 days ago
Undisclosed
Ulu Pandan
- Ensure all engineering works, designs & detailing are structurally safe, practical, economy & buildable and comply with the relevant statutory regulations, client requirements, Standards & Codes of Practice.
- Manage project stakeholders, clients, design & drafting team, and other relevant parties to ensure ST approvals, Permit to Start Work, relevant Authority Approvals, As-Built Clearances, TOP and CSC are obtained timely.
- Degree in Civil & Structural Engineering. ...
Posted
a month ago
Undisclosed
Malaysia
- Knowledge of electrical standards and safety regulations (IEC, IEEE, etc.).
- Good understanding of control systems, power distribution, and electrical components.
- Strong analytical, problem-solving, and detail-oriented skills. ...
Posted
a month ago
SGD2,800 - SGD4,600 每月
Singapore
- Support during manufacturing assembly and customer buy-off.
- Design mechanical parts, assemblies, and systems based on project requirements
- using CAD software (e.g. SolidWorks, AutoCAD, Inventor). ...
Posted
a month ago
Undisclosed
Malaysia
- Good understanding of timing concepts, Experience in Generating and Implementing ECOs to fix timing, noise, and EMIR violations.
- Experience in Tcl/Perl/Shell/Python programming, Mentor Calibre DRC/LVS/PERC, and Apache Totem EM & IR analysis is a plus.
- Familiar with mixed signal layout matching techniques, such as interdigitation, common centroid and dummies for matching, bypass capacitor design and optimization, power supply bus construction using star connections, critical route shielding, triple well layout, ESD device and cell layout, and guard ring layout methods. ...
Posted
23 days ago
Undisclosed
- Assists project management in the development of proposals to ensure accurate technical, staffing, budgetary, and schedule content.
- Demonstrates effective communications (teleconference, email, and in-person) through interaction with customers (internal and external) regarding project technical subject matter.
- Responsible to exemplify and hold their team accountable to demonstrating the Plexus Core Values. Leader will focus on evaluating potential, driving succession planning, and ensuring their employees receive the development and coaching required to realize their full potential. (as applicable) ...
Posted
19 days ago
SGD4,000 - SGD4,000 每月
Singapore
- Work with software, electronics, and vision engineering teams to integrate mechanical designs into complete system solutions.
- Apply Design for Manufacturing (DFM), Design for Assembly (DFA), and concurrent engineering principles to ensure efficient and robust designs.
- Develop and validate pneumatic and hydraulic circuits and ultra-precision, high-speed pick-and-place mechanisms. ...
Posted
25 days ago
SGD5,000 - SGD5,000 每月
Singapore
- Conduct DFMEA, DFM, and DFA for designed products and components
- Perform FEA simulations to ensure designs are robust
- Perform hands on in-house prototyping for functional and aesthetic validation ...
Posted
25 days ago
SGD6,500 - SGD6,500 每月
Singapore
- General flip-chip BGA package design & engineering
- Eng (EE/EEE) or similar field and 5+ years’ experience in flip-chip-BGA package design, including high-speed SerDes
- Eng (EE/EEE) or similar field and 3+ years’ experience in flip-chip-BGA package design, including high-speed SerDes ...
Posted
a month ago
SGD2,550 - SGD2,550 每月
Singapore
- Working location: Tuas Crescent (Company Transport Provided)
- Working day: Monday to Friday
- Working hours: 8.30am to 5.15pm ...
Posted
13 days ago
SGD5,000 - SGD5,000 每月
Singapore
- Conduct simulations and analyses to verify and validate design performance.
- Build and evaluate mock-ups/prototypes to collect data, assess functionality, and enhance designs.
- Participate in design review activities with internal and external stakeholders. ...
Posted
a month ago
SGD5,000 - SGD5,000 每月
Singapore
- Minimum Degree in Electrical & Electronics Engineering/Computer Studies or it’s equivalent.
- At least 5 years’ experience in programming on Windows (XP and above) environment.
- Good experience in C++, VC++, MFC, SQL and OOP. ...
Posted
a month ago
Job searches related to “Design Engineer”
浏览位置:
查看更多地点
浏览公司:
查看更多公司
按"design engineer"浏览工作:
按"design engineer"浏览工作:
查看所有行业