41份Technical Troubleshooting工作在Pulau Pinang - October 2026
显示41个工作的结果
"technical troubleshooting"
在 Pulau Pinang
MYR4,500 - MYR6,000 每月
- Bachelor's Degree in Electrical Engineering, Electronic Engineering, or a related field.
- Minimum 5–7 years of relevant service engineering experience, preferably in industrial or manufacturing environments.
- Experience in surface treatment, coating systems, or related technologies, including electrochemical and surface preparation processes. ...
最后机会申请此工作。
Posted
4 days ago
MYR2,000 - MYR2,800 每月
+额外补偿
- Minimum education is Certificates / Vocational / Diploma in any related field
- Certificate in E&E (Electrical & Electronics) or Mechanical or equivalent.
- Good practical knowledge of aircond servicing, electrical systems and wiring. ...
Posted
7 days ago
MYR2,500 - MYR3,500 每月
- Coordinate day-to-day technical and field operations across all assigned sites within the Northern Zone.
- Coordinate technicians and Team Leaders for Installation & Upgrade, Preventive Maintenance, and Testing & Commissioning activities.
- Monitor site activities to ensure works are completed according to project requirements and schedules. ...
Posted
a month ago
MYR1,700 - MYR2,000 每月
Fresh Graduates
- Operate production machines according to approved work instructions (WI) and SOP.
- Set up and prepare machines before production starts.
- Monitor machine performance during production. ...
Posted
a month ago
Undisclosed
Fresh Graduates
- Diploma / Degree in Information Technology / Electrical & Electronic / Mechanical/ IT Networking or similar discipline.
- 1-2 years of working experience in the Information Technology field.
- Ability to demonstrate and troubleshoot the product. ...
最后机会申请此工作。
Posted
11 days ago
MYR2,500 - MYR3,500 每月
- Diploma or Technical Certificate in Mechanical Engineering, Electrical Engineering, Mechatronics, Manufacturing Engineering, or related field.
- Minimum 2 years of experience in maintenance, manufacturing, semiconductor, or related industries.
- Experience in procurement, inventory management, and maintenance coordination is preferred. ...
Posted
20 days ago
MYR1,700 - MYR1,800 每月
- Min Diploma or Certificate in Mechanical, Electrical, Electronics, Mechatronics or equivalent vocational certification.
- Fresh graduate are welcome to apply or minimum 1 - 2 years of working experience in semiconductor industry (Reliability lab experience preferred).
- Experiences of reliability testing, statistical analysis, failure analysis and IC testing. ...
Posted
2 months ago
MYR6,000 - MYR7,500 每月
- 候选人必须至少拥有工程证书（电气、电子、机电一体化）或同等经验。
- 此职位需要至少5年的相关领域工作经验。
- 具备机械和电气方面的技术经验。 ...
Good electro-mechanical equipment troubleshooting skills.
Read and orally communicate in Mandarin (writing ability not required).
+3
Posted
2 months ago
Undisclosed
- Qualification & Experience: Diploma holder in Engineering or any related discipline. Relevant working experience is preferred.
- Employment Type : Full time
- Fluent in English, and Bahasa Malaysia. ...
Posted
2 months ago
Undisclosed
- Certificate in mechanical / electrical engineering or equivalent.
- Minimum 1 year of relevant working experience is a plus.
- Certificate in mechanical / electrical engineering or equivalent. ...
Posted
2 months ago
Undisclosed
- Experienced in Wirebond process and able to perform troubleshooting, set-up, conversion and recipe creation.
- Employment Type : Full time
- Fluent in English, and Bahasa Malaysia. ...
Posted
2 months ago
MYR2,000 - MYR3,500 每月
- Diploma / Certificate in Mechanical, Manufacturing, Mechatronics, or related field.
- 2 3 years of working experience in CNC machining environment (automotive industry is an advantage).
- Good understanding of CNC machine operation and setup (Lathe and Milling). ...
Posted
2 months ago
MYR1,700 - MYR2,500 每月
- Carry out installation, upgrade, maintenance, testing and commissioning works at site as assigned.
- Perform troubleshooting and corrective works for CCTV systems and related equipment.
- Support site activities according to project schedules and requirements. ...
-Willing and able to travel between project sites within the Northern Zone.
-Willing to work after hours
+4
Posted
a month ago
MYR1,700 - MYR2,200 每月
- Education: Minimum SPM, PMR, SKM, secondary school education, or equivalent (entry-level / fresh candidates welcomed).
- Working Schedule & Availability:Willingness to work inrotational shifts (e.g., morning/night shifts) and work on-site in Bayan Lepas.
- Technical & Operational Capabilities: ...
Posted
2 months ago
MYR2,300 - MYR2,500 每月
- Minimum SPM, Certificate, Diploma, or equivalent qualification in Electronics, Electrical or a related field.
- Basic knowledge of electronic components, wiring, and electrical systems.
- Experience in electronic repair, troubleshooting, or maintenance is an advantage. ...
Posted
2 months ago
MYR2,300 - MYR3,500 每月
- Diploma in Mechatronics, Electrical, Electronic Engineering, or a related field.
- Basic knowledge of industrial equipment maintenance and troubleshooting.
- Able to read and follow technical drawings, schematics, and work instructions. ...
Posted
18 days ago
MYR2,300 - MYR2,500 每月
- Minimum SPM, Certificate, Diploma, or equivalent qualification in Electronics, Electrical or a related field.
- Basic knowledge of electronic components, wiring, and electrical systems.
- Experience in electronic repair, troubleshooting, or maintenance is an advantage. ...
Posted
2 months ago
Undisclosed
- Bachelor's Degree in Electrical Engineering, Electronics Engineering, Mechanical Engineering, Mechatronics, or a related field.
- Knowledge of manufacturing equipment, automation systems, and industrial machinery.
- Experience in equipment setup, installation, commissioning, maintenance, and troubleshooting. ...
最后机会申请此工作。
Posted
a month ago
MYR4,000 - MYR5,500 每月
- Must-Have
- Diploma / Degree in IT, Networking, Computer Engineering, or equivalent
- 5 years experience in Data Center / Infrastructure / IT Support role ...
Posted
a month ago
Undisclosed
- Able to perform PM and CAL for in charge platform
- Able to perform tester troubleshooting and repair.
- Attend issues that highlighted by techs that cannot be resolve. ...
Posted
a month ago
MYR3,800 - MYR5,500 每月
Fresh Graduates
- 机械工程或机电一体化工程学士学位
- 具备工程原理及设计流程的基本理解
- 熟悉 CAD/CAM 工具及相关技术，具备 SOLIDWORKS 经验者优先 ...
Posted
12 days ago
MYR3,800 - MYR5,500 每月
Fresh Graduates
- 机械工程或机电一体化工程学士学位
- 具备工程原理及设计流程的基本理解
- 熟悉 CAD/CAM 工具及相关技术，具备 SOLIDWORKS 经验者优先 ...
Posted
12 days ago
MYR3,800 - MYR5,500 每月
Fresh Graduates
- 机械工程或机电一体化工程学士学位
- 具备工程原理及设计流程的基本理解
- 熟悉 CAD/CAM 工具及相关技术，具备 SOLIDWORKS 经验者优先 ...
Posted
12 days ago
MYR3,800 - MYR5,500 每月
Fresh Graduates
- 机械工程或机电一体化工程学士学位
- 具备工程原理及设计流程的基本理解
- 熟悉 CAD/CAM 工具及相关技术，具备 SOLIDWORKS 经验者优先 ...
Posted
12 days ago
MYR4,500 - MYR6,000 每月
- Bachelor's Degree in Electrical Engineering, Electronic Engineering, or a related field.
- Minimum 5–7 years of relevant service engineering experience, preferably in industrial or manufacturing environments.
- Experience in surface treatment, coating systems, or related technologies, including electrochemical and surface preparation processes. ...
最后机会申请此工作。
Posted
4 days ago
MYR2,000 - MYR2,500 每月
- With or without experience; fresh graduates are encouraged to apply
- Diploma/Certificate in Electrical & Mechanical (for Technician)
- Able to work on a shift basis ...
Posted
19 days ago
MYR2,000 - MYR2,500 每月
- With or without experience; fresh graduates are encouraged to apply
- Diploma/Certificate in Electrical & Mechanical (for Technician)
- Able to work on a shift basis ...
Posted
19 days ago
MYR1,800 - MYR2,300 每月
- 最低SPM或同等学历。
- 具备注塑成型经验者优先。
- 无经验者将提供培训。 ...
Posted
2 months ago
MYR2,300 - MYR3,500 每月
- Diploma in Mechatronics, Electrical, Electronic Engineering, or a related field.
- Basic knowledge of industrial equipment maintenance and troubleshooting.
- Able to read and follow technical drawings, schematics, and work instructions. ...
Posted
a month ago
MYR3,500 - MYR5,500 每月
- Education: Bachelor’s Degree in Mechanical Engineering, Electrical Engineering, Mechatronics, or a related industrial engineering discipline.
- Experience: Minimum 2 to 3 years of hands-on plant maintenance experience within a feedmill, flour mill, palm oil mill, or high-volume automated manufacturing facility.
- Work Requirements: On-call availability for emergency plant breakdowns and willingness to support scheduled plant shutdowns during weekends or nights. ...
Posted
a month ago