400+份Electrical Engineering工作在Pulau Pinang - September 2026
显示455个工作的结果
"electrical engineering"
在 Pulau Pinang
Undisclosed
- Diploma Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent years of related experience.2. Preferably 8 to10 years of working experience in the related field.3. Experience in managing daily production, manpower planning, and quality/throughput control. Hands-on skill in mechanical or electrical assembly, Microsoft Office & leadership.
最后机会申请此工作。
Posted
17 days ago
Undisclosed
- At least a SPM, Certificate in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical). Fresh graduate of Diploma or higher qualification is accepted.2. 0 - 2 year(s) of working experience in the related field is required for this position.3. Hands-on skill in mechanical or electrical assembly.
最后机会申请此工作。
Posted
17 days ago
Undisclosed
- Bachelor's degree in Electrical / Mechanical / Mechatronics Engineering or equivalent years of related experience
- Preferably 5-8 years of working experience in the related filed is required for this position
- Bachelor's degree in Electrical / Mechanical / Mechatronics Engineering or equivalent years of related experience ...
最后机会申请此工作。
Posted
17 days ago
Undisclosed
- Degree in Mechanical/Electrical/Mechatronics/Manufacturing Engineering field or equivalent years to related experience.2. Min 5 years working experience in clean room environment, exposure in Semicon industry.3. Experience managing security personnel, vendors, and contractors.4. Familiar with manufacturing facility security and regulatory.5. Strong leadership and team management skills.6. Good knowledge of access control, CCTV, alarm systems, and security technology.7. Excellent incident investigation and report writing skills.8. Good planning and organizational skills with attention to detail.9. Ability to handle emergencies calmly and decisively.10. Proficient in Microsoft Office for reporting and documentation.
最后机会申请此工作。
Posted
17 days ago
Undisclosed
- Diploma in Welding Fabrication or equivalent years of related experience.
- Minimum 5-8 years experience in Welding field. Experience as TIG and MIG welding supervisor.
- Able to weld, fitting, train welder (TIG/MIG) and Quick-thinking, problem-solving skills required. ...
最后机会申请此工作。
Posted
23 days ago
Undisclosed
- Degree in Mechanical Engineering/Mechatronic/Manufacturing or equivalent years of related experience.
- Minimum of >5 to 8 years working experience in hands-on quality assurance of fabrication on Metal Works & CNC Machining.
- Supplier quality engineer role. ...
最后机会申请此工作。
Posted
17 days ago
Undisclosed
- Minimum certificate/diploma in Mechanical Engineering/Manufacturing or 5~8 years hands-on experience.
- Minimum of 5~8 years working experience in hands-on quality inspection of fabrication on Metal Works.
- Senior QA technician role or Supervisor role. Handle quality control staff & resources management. Communicate well with process owner or even sub-con. Good understanding of production quality control. ...
最后机会申请此工作。
Posted
23 days ago
Undisclosed
- Minimum 3 years of experience in accounting or finance.
- Strong knowledge of financial reporting, taxation, budgeting, and auditing.
- Proficient in Microsoft Excel and accounting/ERP systems. ...
最后机会申请此工作。
Posted
17 days ago
Undisclosed
- Degree in Mechanical Engineering/Mechatronic/Manufacturing or equivalent years of related experience.
- Minimum 2 to 5 years working experience in hands-on quality assurance of fabrication on Metal Works & CNC Machining. Supplier quality engineer role. Supplier monitoring & development management.
- Work independently & communicate well with internal & external process owner. ...
最后机会申请此工作。
Posted
23 days ago
Undisclosed
- Diploma/Certificate in Electrical, Electronics, Mechanical Engineering, Mechatronics, or a related field.
- Basic knowledge of electrical, mechanical, pneumatic, and automation systems.
- Able to perform equipment installation, setup, preventive maintenance, and troubleshooting. ...
最后机会申请此工作。
Posted
23 days ago
MYR4,000 - MYR5,000 每月
- Diploma or bachelor’s degree in mechanical engineering, Manufacturing Engineering, or a related field is preferred.
- Minimum of 3 years of experience as a CNC Programmer or similar role in a manufacturing environment.
- Proficiency inSolidWorks/CAM software for programming CNC machines. ...
最后机会申请此工作。
Posted
20 days ago
Undisclosed
- Good knowledge of accounting principles, AP processes, and cash flow management.
- Proficient in Microsoft Excel and accounting/ERP systems.
- Good analytical, numerical, and problem-solving skills. ...
最后机会申请此工作。
Posted
17 days ago
MYR3,500 - MYR6,000 每月
- Must possess at least a Bachelor's Degree. Only candidates with a Degree qualification will be considered.
- At least 1–3 years of working experience as a Production Supervisor in the semiconductor industry.
- Willing and able to work in shifts. ...
Posted
8 days ago
Undisclosed
- Minimum Diploma in Mechanical Engineering/Manufacturing or any other related field (Or more than 5 years related experiene in Quality Assurance or Project Engineering).
- Minimum 3~5 years experience in QA or Engineering department document administration, collect quality data, review supplier document & final report compilation.
- Basic understanding on QA department functions, data collection & compilation. Good skills in Microsoft Office & Adobe Acrobat. Good communication skills in Bahasa Malaysia & English.
最后机会申请此工作。
Posted
23 days ago
Bending Technician/ Operator
MYR1,700 - MYR3,000 每月
- Possess knowledge and minimum 2 years experience in punching/ laser cutting process.
- PT3/ SPM equivalent or technical certificate
- Eye-hand coordination and manual dexterity ...
Posted
22 days ago
MYR2,000 - MYR3,000 每月
- Chargeman Certificate (AO or equivalent) or Wireman (PW4 or equivalent)
- Hands-on experience or knowledge of solar panel installation procedures and best practices
- Proficient in electrical wiring and basic electrical troubleshooting ...
Posted
2 days ago
Undisclosed
- 3 year working experience in manufacturing industry
- Degree in safety & health, sciences, environmental or engineering studies
- Preferrable Green book holder SHO ...
最后机会申请此工作。
Posted
a month ago
Marketing & Engineering
MYR2,000 - MYR2,500 每月
Fresh Graduates
- Certificates/ Diploma/Degree in Mechanical Engineering, Manufacturing Engineering, Mechatronics, Precision Engineering or related field.
- Fresh graduates are welcome to apply.
- Experience in precision engineering, CNC machining or quotation/costing is an advantage. ...
Posted
2 days ago
Mechanical & Electrical Technician / Electrical Assembler
MYR2,500 - MYR3,500 每月
- Basic knowledge of electrical theory.
- Able to read and interpret wiring diagrams and technical drawings.
- Minimum 2 years of experience in non-standard automation electrical assembly. ...
Posted
16 days ago
Undisclosed
- At least Diploma in related field or equivalent experience.
- At least 4-8 year(s) of working experience in the related field is required for this position with supervisory role.
- Basic knowledge on Custom procedure, Incoterm awareness and understanding shipping & store process & requirement. Familiarity with warehouse management systems (WMS) and other relevant ERP software. Knowledge of drive forklift will be add advantage.
最后机会申请此工作。
Posted
17 days ago
Storekeeper cum Lorry Driver
MYR2,000 - MYR3,000 每月
- Minimum 2 years experience as commercial truck driver
- Experience with goods handling and GPS navigation is preferred
- Must possess at least a Primary/ Secondary School/ PMR/ SPM in any field ...
Posted
22 days ago
MYR3,500 - MYR5,000 每月
- 负责CNC机床的操作、设置和维护，确保生产效率和产品质量。
- 能够解读和理解工程图纸，并根据图纸要求进行精确加工。
- 具备至少3-5年的CNC加工相关经验，熟悉各种加工技术和工艺。 ...
Posted
23 days ago
Undisclosed
- Major in computer science or related (Degree or above) with at least 3 years working experience
- Familiar with Oracle/SQL Server and other database technologies, and proficient in using common SQL language.
- Good communication and teamwork skills, strong stress resistance and execution, able to adapt to business trips Proficient in using various common tools for IT projects, such as WORD, PPT and other common tools ...
Posted
a month ago
Senior Production Planner
MYR6,000 - MYR8,000 每月
- Tertiary education in related field, Operations Management or equivalent
- Preferably 2 - 3 years related working experience
- Deadline-Oriented ...
最后机会申请此工作。
Posted
20 days ago
Undisclosed
- At least 5 Years of working experience in the Warehousing or related industries
- Candidate should possess at least Degree in Warehousing or related field
- Preferably candidates specialized in Logistics/Supply Chain or equivalent ...
Posted
a month ago
Undisclosed
- Degree: Bachelor's in Supply Chain, Procurement, Business, or equivalent.
- Experience: Minimum 3-5 years in sourcing/procurement, focused on cost optimization (manufacturing experience preferred). Candidates with technical background will be an added advantage Technical :Proficient in Excel and data analysis.
- Proven track record of strong negotiation, analytical, communication, and stakeholder management skills. ...
Posted
a month ago
Undisclosed
- Minimum 2 years of experience in a procurement or planning role, preferably in the manufacturing industry
- Strong negotiation and problem-solving skills, with the ability to work effectively with cross-functional teams
- Proficient in using SAP and data analysis tools ...
Posted
a month ago
MYR2,600 - MYR4,000 每月
- Minimum SPM / O-Level, Professional Certificate, Diploma, Advanced Diploma, Higher Diploma, or Graduate Diploma.
- At least 1–3 years of working experience as a Production Supervisor in the semiconductor industry.
- Able to communicate in Mandarin. ...
最后机会申请此工作。
Posted
5 days ago
Machinist (Cnc 3 Axis / Wire Cut)
MYR2,000 - MYR3,000 每月
Fresh Graduates
- Diploma or Certificate in Mechanical Engineering, Manufacturing, or a related field.
- Possess some knowledge in CNC machining, EDM, Wire Cut, Grinding or Milling are added advantage.
- 2–3 years mechanical assembly experience may be required. ...
Posted
4 days ago