Jobs
Companies
Forums
1,100+ Technician Pm Jobs in Bayan Lepas - October 2026 - High Salaries
Showing 1,110 jobs results for
"technician pm"
in Bayan Lepas
Never miss any updates for Technician Pm jobs in Bayan Lepas
Manage Alert
Undisclosed
- Fixing Mistakes: Issuing Non-Conformance Reports (NCR) when work is sub-standard, and tracking them to make sure the contractor fixes the issue properly.
- Testing Witness: Witnessing and signing off on factory tests (FAT) and site testing/commissioning (T&C) for critical M&E systems.
- Education: Degree in Electrical or Mechanical Engineering (registered with BEM). ...
Posted
a month ago
Undisclosed
- Perform floorplanning, placement, and routing while optimizing for area, performance, and manufacturability.
- Conduct thorough physical verification such as DRC, LVS, ERC including RV.
- Drive design reviews and provide technical mentorship to junior layout engineers. ...
Posted
a month ago
Undisclosed
- Analyze supplier quotes and bids
- Part qualification, Tooling qualification
- Participate in driving the supplier quality performance management e.g., DPPM, SQIP ...
Posted
a month ago
Aemulus Corporation Sdn Bhd
Undisclosed
- Familiar with stack-up design, controlled impedance routing, length matching, and high-speed layout as required.
- Analyze high-speed digital, analog, and mixed-signal paths to ensure optimal signal integrity.
- Conduct SI/PI simulation and analysis (e.g., crosstalk, EMI/EMC, noise sensitivity). ...
Posted
a month ago
Undisclosed
- Demonstrate the ability to work independently with minimal supervision, communicate effectively, and adapt quickly to changing priorities.
- Drive and enforce strict process controls across all manufacturing operations to ensure quality, efficiency, and compliance.
- Establish robust, repeatable, and reproducible manufacturing processes, parameters, and control plans. ...
Posted
a month ago
Undisclosed
- Pro-active collaboration in the global CoC and the related sub-CoC group (Center of Competence). Develop suitable strategies to execute governance over the core process within the area of regional responsibility defined for the BTC-AP BMI.
- Collaborate with R&D to promote the simultaneous engineering process for combined product and process development with the aim of generating manufacturable new products in accordance with the CoE’s and division’s needs.
- Conduct early evaluations of manufacturing technology suppliers in APAC region which would enhance B. Braun manufacturing capabilities, especially in the area of innovative automation technologies around the packaging processes. Provide training concepts and execution recommendations for technically skilled workers, to be implemented by a technical training center. ...
Posted
a month ago
OSRAM Opto Semiconductors (Malaysia) Sdn. Bhd., Penang
Undisclosed
- Knowledge on Semiconductors & LED Characteristic, New Product Introduction management, LED Manufacturing Process, LED Testing Concept.
- Knowledge on the Minitab, 6 Sigma Tools. Details & Strong Analytical Skills, Systematic 8D problem solving. Planning & Organizing Skills, Project Management Skills.
- Fluency in English, Mandarin and Bahasa Malaysia, added advantage with German language capability. ...
Posted
a month ago
Undisclosed
- Support compliance and regulatory initiatives
- Provide effective written and oral communications with technical and non-technical stakeholders
- Mentor and guide junior team members, promoting knowledge sharing and best practices ...
Posted
a month ago
Undisclosed
- Perform schematic capture, simulation, analysis, and lab based validation of analog circuits.
- Work with project teams to translate requirements into detailed specifications and implement designs that meet performance, cost, and reliability targets.
- Drive your assigned technical deliverables to completion, ensuring high quality execution throughout design, layout, and system integration. ...
Posted
a month ago
Undisclosed
- With the relevant technical competencies, lead and execute product realization from conceptual stages all the way thru manufacturing transition.
- Able to support the development of technical proposals for customers, providing technical solutions to realize concepts and estimating associated labor and material costs required.
- Recognized subject matter expert for one or more technical areas. See Technical Competencies section. ...
Posted
10 days ago
Database Automation Engineer (Oracle or MS-SQL) | Penang Database Automation Engineer (Oracle or MS-SQL) | Penang
Commerz Global Service Solutions
Undisclosed
- This role requires working EMEA hours (3:00 pm – 12:00 am), with a shift allowance provided.
- The Database Automation Engineer will be responsible for designing, implementing, and maintaining automated solutions using the standard automation tools (Ansible / Service Broker/terraform /CICD, RHEL-AAP,etc) to deploy database’s IT infrastructure (Oracle / MS-SQL / PosgreSQL) and their needed integration services( backup tools, monitoring agents, Active Directory access,CMDB,etc.).
- Collaborate with database operations, database infrastructure engineers to automate the provisioning or removal of Database’s IT infrastructure on Linux or Windows systems using automated processes. ...
Posted
24 days ago
Undisclosed
- Help operation team for yield loss analysis and feedback observations to the key individual.
- Work with supporting group example production supervisors, process Engineering, IE depart, Equipment Engineering on technical supports when required.
- Focus on backend process & quality control performance. ...
Posted
a month ago
Undisclosed
- Incorporate assembly rules (die placement, bump/ball pitch, solder joint reliability, warpage control) into package designs.
- Develop and validate Flip Chip package designs, including bump assignment, redistribution layers (RDL), and underfill considerations.
- Collaborate with Signal Integrity (SI), Power Integrity (PI), and thermal analysis teams to ensure robust performance. ...
Posted
a month ago
Undisclosed
- Create, review, and coordinate Engineering Change Orders implementation with the CM partner and make process improvement recommendations.
- Acts as a primary interface with the Teradyne NPI Ops team / Engineering team during the release of a new assemblies or revisions to assemblies already in use.
- To work with the CM partner to drive operation improvement. ...
Posted
a month ago
Undisclosed
- Responsible to develop User’s Requirement Specification (URS) and Functional Specification (FS)
- Driving the collaboration between process development and R&D to promote the simultaneous engineering process for combined product and process development with the aim of generating manufacturable new products in accordance with the CoE’s and division’s needs. Conduct early evaluations of manufacturing technology suppliers in APAC region which would enhance B. Braun manufacturing capabilities, especially in the area of innovative process technologies.
- Provide training concepts and execution recommendations for technically skilled workers, to be implemented by a technical training center. ...
Posted
a month ago
Undisclosed
- Key Responsibilities as a Technical Support Engineer, you will be expected to contribute to the whole team from your gift of talents, intellect, experience, and enthusiasm, as well as have fun!
- You will be responsible for installing, upgrading NI/Emerson OptimalPlus systems and performing various integration tasks between NI/Emerson OptimalPlus systems and Customer’s systems and network.
- You will be responsible for providing IT maintenance and administration for NI/Emerson OptimalPlus hardware and database for the customer production environment. You will be responsible for supporting customer’s technical requests and troubleshoot technical issues in NI/Emerson OptimalPlus systems and interface to Customer’s systems ...
Posted
a month ago
Undisclosed
- Coordinate with external vendors to obtain technical support, quotations, and repair services for equipment deviations.
- Collaborate with Process Engineering and Quality teams to investigate and resolve equipment-related non-conformances, including out-of-tolerance conditions.
- Develop, implement, and monitor preventive maintenance (PM) programs, including schedules, resources, KPIs, and maintenance objectives. ...
Posted
a month ago
Undisclosed
- Troubleshoot and analyze issues found during testing, collect logs, and work with R&D teams on issue reproduction and root cause analysis.
- Develop and maintain test cases, test reports, and technical documentation.
- Work closely with hardware, firmware, and software teams to drive issue resolution and improve product quality. ...
Posted
a month ago
Undisclosed
- Support review and closure of corrective actions required by customers in a timely manner. Challenge submitted corrective actions of suppliers to assure their effectiveness and appropriateness; validate root cause analysis against reported failure analysis.
- Drives supplier 8D Team on completion of urgent quality issues and provides update to Corporate Quality Assurance / Corporate SQE; drive completion of investigation through task force meetings
- Drive continuous improvement and maintain communication with assigned suppliers through quality focus meetings and sharing of lessons learned. ...
Posted
a month ago
Undisclosed
- · Experience: 8–10 years of relevant experience with a Bachelor’s degree in Engineering or a related field.
- · Interconnect Expertise: In-depth knowledge of cable and connector manufacturing processes, high-speed cable connectivity, and fiber optic technology.
- · Quality Management: Proven experience with APQP, FMEA, PPAP, and conducting regular process audits. ...
Posted
a month ago
Undisclosed
- Interface with suppliers, Design Engineering, board test and manufacturing team to achieve desired improvement goals.
- Conduct product performance and reliability analysis to help improve product design.
- Initiate conference meeting with US engineering team on technical issues when necessary. ...
Posted
a month ago
Commerz Global Service Solutions
Undisclosed
- The engineer has an agile and digital mindset that always adapts to the current requirements using the appropriate development options.
- This role requires working EMEA hours (3:00 pm – 12:00 am), with a shift allowance provided.
- Development and implementation of database specific Linux operating systems processes for platforms that hosts databases, ensuring platform database services, processes and supporting components are performant and providing data integrity, availability, security and scalability ...
Posted
a month ago
Undisclosed
- Technical Implementation & Testing Management: Lead commissioning and technical implementation of MES solutions; manage acceptance test creation, execution, and approval; monitor technical implementations and support during ramp‑up.
- Support & Collaboration : Collaborate closely with template and local teams, act as 2nd‑level support for template functions, and ensure effective engagement with MES partners and stakeholders.
- For a more senior position level, manage all aspects of a large scale, complex, or significant engineering project, from start to finish, so that it is completed on time and within budget. ...
Posted
a month ago
Undisclosed
- Responsible for applying global quality requirements related to B. Braun's production sites worldwide. Assist in developing project concepts and feasibility studies on best practice for manufacturing.
- Work closely with the Research and Development (R&D) team in product development and design for manufacturability. Work with other functional teams such as Engineering, Quality, Supply Chain, Procurement etc. to improve quality and yield of production center.
- For more senior position level, shall provide training concepts and provide recommendations for developing junior project managers in the department. ...
Posted
a month ago
MYR4,000 - MYR6,000 Per Month
- Report any defects, safety issues and non-conformities immediately.
- Record and maintain accurate site reports included inspections records, checklists, photographs and etc.
- Follow up on identified issues and ensure all corrective actions are taken. ...
Posted
3 days ago
MYR4,000 - MYR6,000 Per Month
- Report any defects, safety issues and non-conformities immediately.
- Record and maintain accurate site reports included inspections records, checklists, photographs and etc.
- Follow up on identified issues and ensure all corrective actions are taken. ...
Posted
a month ago
MYR1,700 - MYR1,701 Per Month
- Professional development
- Easy to apply
- Can walk in interview ...
Posted
3 days ago
MYR2,400 - MYR3,500 Per Month
- Contribute to research and development initiatives that support nutritional innovation and community health outcomes.
- Collaborate closely with pharmacists, doctors, physiotherapists, audiologists, and other healthcare professionals to provide holistic care.
- Work with the Branch Manager and outlet team to achieve organizational goals, KPIs, and service excellence. ...
Posted
3 days ago
MYR1,700 - MYR2,000 Per Month
- Monitoring patient comfort, reassuring anxious patients, and acting as a patient advocate throughout their visit.
- Greeting patients warmly and ensuring a professional first impression.
- Scheduling and managing appointments, including coordination with dental teams for optimal workflow. ...
Posted
3 days ago
MYR2,531.78 - MYR2,807.61 Per Month
- This position performs all tasks involved in the production of the company’s
- products. The includes fulfillment, hand swaging, visual mechanical inspection and
- packing. The Production Worker must follow Work Instructions and Cosmetic ...
Posted
3 days ago
Job searches related to “Technician Pm”
Browse Company:
More Companies
Browse "technician pm" Job By:
Browse "technician pm" Job By:
More Industries