Jobs
Companies
Forums
300+ Process Engineering Jobs in Pulau Pinang - October 2026 - High Salaries
Showing 321 jobs results for
"process engineering"
in Pulau Pinang
Never miss any updates for Process Engineering jobs in Pulau Pinang
Manage Alert
MYR4,500 - MYR6,000 Per Month
Prai
- Support NPI, trial runs and process validation.
- Prepare and maintain SOP, WI, PFMEA and Control Plan.
- Conduct root-cause analysis and corrective actions for production defects. ...
Posted
22 days ago
Undisclosed
Prai
- Establish governance for process parameters, Failure Modes and Effects Analyses (FMEA), and standard operating procedures (SOPs), ensuring consistent, controlled, and scalable plating processes.
- Direct the analysis of Statistical Process Control (SPC) data and process capability studies, translating findings into capital, equipment, and process investment recommendations.
- Lead cross-functional and cross-site teams to investigate and resolve the most complex customer complaints, driving root-cause corrective actions and structural reductions in process COPQ. ...
Posted
2 days ago
Trio Tech (M) SDN BHD
MYR2,100 - MYR2,300 Per Month
- Set up, calibrate, qualify, and verify equipment according to specifications.
- Monitor equipment performance and support continuous improvement initiatives.
- Work with Engineering and Production teams to resolve technical issues. ...
Posted
a day ago
MYR3,000 - MYR4,500 Per Month
- Upgrade and improve process engineering equipment and jigs usage.
- Establish effective total productive maintenance procedures.
- Improve the process systems performance, throughput and flexibility. ...
Posted
23 days ago
Undisclosed
- Develop expertise in how TE products are applied based on Customer’s manufacturing processes. Translates customer’s assembly process to TE product design teams, assisting with crafting TE Application Spec documents. Collaborates early and aligns with customers on TE’s final Application Spec. Conducts signoff review between TE and Customer for NPI products.
- Works with TE engineering to integrate customer application parameters into TE product and application specifications.
- Provides internal training to TE product and FAE groups showing new process technologies that our customer base is utilizing or experimenting with for future development. ...
Posted
17 days ago
Undisclosed
- Develop expertise in how TE products are applied based on Customer’s manufacturing processes. Translates customer’s assembly process to TE product design teams, assisting with crafting TE Application Spec documents. Collaborates early and aligns with customers on TE’s final Application Spec. Conducts signoff review between TE and Customer for NPI products.
- Works with TE engineering to integrate customer application parameters into TE product and application specifications.
- Provides internal training to TE product and FAE groups showing new process technologies that our customer base is utilizing or experimenting with for future development. ...
Posted
17 days ago
Undisclosed
- Ability to work with local FAE and product engineering teams on new concepts.
- Develop expertise in how TE products are applied based on Customer’s manufacturing processes. Translates customer’s assembly process to TE product design teams, assisting with crafting TE Application Spec documents. Collaborates early and aligns with customers on TE’s final Application Spec. Conducts signoff review between TE and Customer for NPI products.
- Works with TE engineering to integrate customer application parameters into TE product and application specifications. ...
Posted
17 days ago
Undisclosed
- Coordinate New Product Introduction (NPI) runs in the post-sputter process area.
- Document processes, procedures, and best practices.
- Use tools such as Minitab and Spotfire to support data-driven decision-making. ...
Posted
14 days ago
Undisclosed
- Coordinate New Product Introduction (NPI) runs in the post-sputter process area.
- Document processes, procedures, and best practices.
- Use tools such as Minitab and Spotfire to support data-driven decision-making. ...
Posted
15 days ago
Undisclosed
- Participate in daily yield improvement meetings, weekly Cleaning Virtual Global Con calls and weekly Asia Cleaning Team Activities progress updates.
- Assist engineers in troubleshooting process issues and performing root cause analysis, while following all safety and heath guidelines.
- Support cross-functional coordination with FA, Contamination, NPI, and Development teams as assigned. ...
Posted
21 days ago
Undisclosed
- Development of new processes and/or operational methods improving the quality of test stand operations and performance.
- Ability to work independently, resolve technical and manufacturing issues without detailed direction, and work as a part of a team
- Provide technical support and assist in the resolution of manufacturing problems as required. ...
Posted
21 days ago
Undisclosed
Malaysia
- Characterize and control critical-to-quality parameters across degas, liquid fill and glue dispense, including gauge R&R on dispense weight and vision inspection, SPC limits and Cpk targets for each parameter.
- Work with Equipment Engineering on tool capability, maintenance intervals and consumable life (nozzles, needles, seals, pumps).
- Lead root cause analysis and corrective action for degas, fill and dispense defects — seal leaks, underfill/overfill, electrolyte contamination, glue voids, stringing, skips and squeeze-out — using FMEA and 8D methodologies. ...
Posted
a day ago
Undisclosed
Prai
- Analyze Statistical Process Control (SPC) data, evaluate process capability, and take necessary actions to ensure processes operate within specification limits.
- Lead cross‑functional teams to investigate and resolve customer complaints, drive root‑cause corrective actions, and reduce process COPQ.
- Ensure plating operations comply with environmental, health, and safety (EHS) regulations and internal EHS procedures. ...
Posted
5 days ago
Undisclosed
Prai
- Ensure project meeting the PAR expenses, lead time, capacity, and product quality expectation.
- Supporting technical documentation of the production processes.
- Optimizing production cost, process improvement and COPQ reduction. ...
Posted
6 days ago
Undisclosed
Malaysia
- Work together with NPI, Fixture Designer, CADCAM Programmer and Production to support new product development and proposal for DFMA (Design for Manufacturing and Assembly).
- Support NPI for new products feasibility study and advise on required product cleaning workflow and packaging processes till realization.
- In-charge for contamination control and pre-packing of products. ...
Posted
22 days ago
MYR1,825.44 - MYR6,411.55 Per Month
- Support NPI for new products feasibility study and provide Cleaning & Anodization Process cycle time for costing purpose.
- Lead problem solving: defining the problem, identifying objectives, assessing risk, developing approach, analyzing results, implement corrective actions and effectively communicate those actions to all required personnel.
- Maintain all the physical and chemical parameter of the process within SPEC. ...
Posted
22 days ago
Undisclosed
- Monitoring on hold lot disposition and provide communication with engineer in order to not impact daily assembly output.
- Maintain all housekeeping / 5s engineering station and tooling’s, to ensure compliance to safety rules.
- Monitor all processes, resolve all products issues and coordinate with production and equipment to reduce downtime and getting better product quality. ...
Posted
22 days ago
Undisclosed
Prai
- Analyze processes to identify opportunities for increased productivity, waste reduction, and sustained quality performance.
- Collaborate with MQA engineers to manage customer complaints (QN), internal quality notifications (IQN), and implement both corrective and preventive actions.
- Troubleshoot machine issues and manage tooling/jig maintenance to ensure smooth production operations. ...
Posted
23 days ago
Undisclosed
- Support the design of experiments (DOE) and process trials
- Perform process qualification runs and collect data for engineering analysis
- Analyze particles and defect inspection data ...
Posted
a month ago
Undisclosed
Prai
- Replace worn or degraded parts proactively to prevent failures and extend equipment life.
- Corrective maintenance
- Diagnose and repair equipment breakdowns promptly using data and structured troubleshooting. ...
Posted
18 days ago
Undisclosed
Prai
- Collaborate with Product Design, Automation, Quality, Operations, and Suppliers to develop robust manufacturing solutions.
- Support the development of tooling, fixtures, automation equipment, and assembly modules from concept through implementation.
- Conduct process studies, validation activities, and capability evaluations to improve quality, productivity, and efficiency. ...
Posted
12 days ago
Undisclosed
Malaysia
- Characterize and control critical-to-quality parameters across degas, liquid fill and glue dispense, including gauge R&R on dispense weight and vision inspection, SPC limits and Cpk targets for each parameter.
- Work with Equipment Engineering on tool capability, maintenance intervals and consumable life (nozzles, needles, seals, pumps).
- Lead root cause analysis and corrective action for degas, fill and dispense defects — seal leaks, underfill/overfill, electrolyte contamination, glue voids, stringing, skips and squeeze-out — using FMEA and 8D methodologies. ...
Posted
13 days ago
Undisclosed
Malaysia
- Align packaging requirements with cross-functional teams, including Manufacturing, Process Engineering, Supply Chain, EHS, Purchasing, and Quality.
- Partner with cross-functional stakeholders to identify and implement margin improvement and technical innovation opportunities across materials, labour, transportation, material handling, storage, and packaging cycle times.
- Establish packaging standards, guidelines, and evaluation criteria for suppliers, and conduct quality and safety assessments to ensure compliance. ...
Posted
a month ago
Undisclosed
George Town
- Review product development requirements for compatibility with processing methods to determine costs and schedules
- Integrates equipment and material capabilities to meet process module and technology specifications
- Drive CIP (Continuous improvement plans) to improve process performance indices ...
Posted
a month ago
Undisclosed
Malaysia
- Candidates should possess Preventive Maintenance skills to assist in scheduled maintenance, basic equipment care, and reporting of potential mechanical or electrical problems.
- Candidates should possess Training skills to share process knowledge, support onboarding of new team members, and promote adherence to safety and operational procedures.
- Relevant technical or vocational qualification in engineering, manufacturing, or a related field is preferred. ...
Posted
a month ago
Undisclosed
Malaysia
- Provide daily technical support to manufacturing operations.
- Yield & Quality Improvement
- Drive yield improvement and defect reduction activities. ...
Posted
16 days ago
Undisclosed
Prai
- Lead mold sampling, first-article inspection, and process/tool qualification for new and revised programs
- Run DOEs to establish robust process windows and reduce variation across shifts and machines
- Plan and oversee preventive maintenance schedules to maximize tool life and minimize unplanned downtime ...
Posted
18 days ago
Browse Location:
More Location
Browse Company:
More Companies
Browse "process engineering" Job By:
Browse "process engineering" Job By: