Jobs
Companies
Forums
300+ Engineer Jobs in Malaysia | Job Vacancies | September 2026 | Ricebowl
Showing 344 jobs results for
"engineer"
Never miss any updates for Engineer jobs
Manage Alert
Undisclosed
Singapore
- Creating corrective maintenance (CM) procedures and troubleshooting guides for shift personnel
- Participating in cost, cycle time, quality, and continuous improvement projects.
- Defining work instructions and operating procedures for alignment and shop floor behavior ...
Posted
24 days ago
Undisclosed
Singapore
- Perform equipment validation/qualification for new models.
- Perform audit /line assessment and suggest areas of improvement within BEMT plants in Calamba, Shenzhen, Muar, Bouskoura, Malta and Rennes BEMT & Outsourced Semiconductor Assembly and Test (OSAT) perimeter and EWS perimeter.
- Ensure that the ESD Control Program is running as per Central Specifications in both Assembly and Test & Finishing within BEMT plants, EWS and OSATs. ...
Posted
18 days ago
Undisclosed
Singapore
- Perform and follow up with schedule preventive maintenance and calibration program and ensure that it is performed in adherence to documented working procedures and in a timely manner
- Implement , recommend and follow up on equipment improvement and reliability program, to ensure it achieved expected results
- Carry out and recommend action plans to reduce cost of equipment maintenance activities ...
Posted
15 days ago
Undisclosed
Malaysia
- Review, validate, and improve 8D report content prepared by QA Engineers prior to approval, ensuring the reports meet required quality standards.
- Compile and analyze customer complaint data for Quality Meetings and Management Reviews.
- Coordinate with technicians and operators and provide guidance or coaching as needed to ensure effective execution of FA activities. ...
Posted
14 days ago
Undisclosed
Singapore
- Liaise with division teams from ADG/AMS/AMG/MDG and support technology and product transfer activities with compliance with the defined timelines
- To liaise with Division in weekly conference call for yield/D0 update and yield master plan.
- To conduct MRB meeting with Division about the disposition of SBL lot in weekly basis. ...
Posted
12 days ago
Undisclosed
Singapore
- Support capacity improvement by participating in qualification definition and report analysis preparation
- Work on data correlation, analysis, and statistics, drawing data from all aspects (yield, parametric, SPC, defectivity, tool and process data for example FDC, process time, output parameters)
- Setup smart manufacturing solution for data analytics and insights, drawing from a broad background of Big Data techniques in statistics, simulation, information technology, machine learning, data engineering etc to discover insightful patterns in semiconductor manufacturing data ...
Posted
12 days ago
Undisclosed
Singapore
- To characterize all process windows to achieve process robustness.
- Liaise with division teams from ADG/AMS/AMG/MDG and support technology and product transfer activities with compliance with the defined timelines
- To liaise with Division in weekly conference call for yield/D0 update and yield master plan. ...
Posted
12 days ago
Undisclosed
Singapore
- Liaise with division teams from ADG/AMS/AMG/MDG and support technology and product transfer activities with compliance with the defined timelines
- To liaise with Division in weekly conference call for yield/D0 update and yield master plan.
- To conduct MRB meeting with Division about the disposition of SBL lot in weekly basis. ...
Posted
12 days ago
Undisclosed
Singapore
- Liaise with division teams from ADG/AMS/AMG/MDG and support technology and product transfer activities with compliance with the defined timelines
- To liaise with Division in weekly conference call for yield/D0 update and yield master plan.
- To conduct MRB meeting with Division about the disposition of SBL lot in weekly basis. ...
Posted
12 days ago
Undisclosed
Singapore
- To characterize all process windows to achieve process robustness.
- Liaise with division teams from ADG/AMS/AMG/MDG and support technology and product transfer activities with compliance with the defined timelines
- To liaise with Division in weekly conference call for yield/D0 update and yield master plan. ...
Posted
12 days ago
Undisclosed
Singapore
- Validate new and existing work procedures with Module Engineering, Industrial Engineering, and Trainers to meet productivity, quality, and service requirements.
- Drive continuous improvement projects and identify shopfloor opportunities to improve production performance indicators.
- Support and sustain Lean practices across production management systems. ...
Posted
a month ago
Undisclosed
Malaysia
- Drive continuous improvement in final test and finishing manufacturing line quality through program of CDIF, Obeya task force and 6 sigma methodology.
- Participate in the FMEA (Failure Mode Effect Analysis) review and validation if when new changes or new detection in manufacturing process
- Ensure the manufacturing process quality control in compliance with IATF 16949, VDA 6.3, and ST quality standards. ...
Posted
a month ago
Undisclosed
Singapore
- Liaise with division teams from ADG/AMS/AMG/MDG and support technology and product transfer activities with compliance with the defined timelines
- To liaise with Division in weekly conference call for yield/D0 update and yield master plan.
- To conduct MRB meeting with Division about the disposition of SBL lot in weekly basis. ...
Posted
18 days ago
Undisclosed
Singapore
- Optimize current processes to improve manufacturability, yield and performance of products.
- Interact and coordinate with product engineering and process team to resolve yield and quality issues.
- Design, execute, and analyze experiments to improve fab process, yield, and quality. ...
Posted
18 days ago
Undisclosed
Singapore
- Define, develop, and tune process recipes, including focus, exposure dose, alignment, overlay, and other critical lithography parameters.
- Support BCD technology development through process characterization, window expansion, and optimization activities.
- Conduct process experiments, collect and analyze data, and implement improvements to enhance process robustness and performance. ...
Posted
18 days ago
Undisclosed
Malaysia
- Documentation: Maintain accurate records of maintenance activities, including inspections, repairs, and parts replacements, using the company's maintenance management system.
- Spare Parts Management: Monitor and manage inventory levels of spare parts and consumables for machines, ensuring timely procurement and availability.
- Safety Compliance: Ensure all maintenance activities are performed in compliance with health and safety regulations and company policies. ...
Posted
4 days ago
Undisclosed
Singapore
- Creating corrective maintenance (CM) procedures and troubleshooting guides for shift personnel
- Participating in cost, cycle time, quality, and continuous improvement projects.
- Defining work instructions and operating procedures for alignment and shop floor behavior ...
Posted
3 days ago
Undisclosed
Malaysia
- Conduct mid- to long-term Test and Finishing capacity analysis and forecast requirements for CAPEX and equipment allocation.
- Provide industrial engineering support for Tester OEE improvement and manufacturing cost reduction activities.
- Apply statistical methods and mathematical calculations to determine manufacturing processes, capacity requirements, and production standards. ...
Posted
15 days ago
Undisclosed
Singapore
- Lead Programs related to Capacity Increase, Equipment efficiency; Productivity improvement and layout optimisation
- Bachelor’s/ Master’s Degree in Industrial Engineering, Project Management or equivalent.
- 2 years of relevant working experience in the semiconductor industry, preferably in roles relating to industrial engineering, project management, process engineering or equivalent. ...
Posted
a month ago
Undisclosed
Singapore
- Lead Programs related to Capacity Increase, Equipment efficiency; Productivity improvement and layout optimisation
- Bachelor’s/ Master’s Degree in Industrial Engineering, Project Management or equivalent.
- 2 years of relevant working experience in the semiconductor industry, preferably in roles relating to industrial engineering, project management, process engineering or equivalent. ...
Posted
18 days ago
Undisclosed
Singapore
- Lead Programs related to Capacity Increase, Equipment efficiency; Productivity improvement and layout optimisation
- Bachelor’s/ Master’s Degree in Industrial Engineering, Project Management or equivalent.
- 2 years of relevant working experience in the semiconductor industry, preferably in roles relating to industrial engineering, project management, process engineering or equivalent. ...
Posted
4 days ago
Undisclosed
Malaysia
- Documentation: Maintain accurate records of maintenance activities, including inspections, repairs, and parts replacements, using the company's maintenance management system.
- Spare Parts Management: Monitor and manage inventory levels of spare parts and consumables for machines, ensuring timely procurement and availability.
- Safety Compliance: Ensure all maintenance activities are performed in compliance with health and safety regulations and company policies. ...
Posted
a month ago
Undisclosed
Singapore
- Process Monitoring and Control:
- Monitor and control photolithography processes to ensure consistent and high-quality output.
- Troubleshoot process issues and implement corrective actions. ...
Posted
10 days ago
Browse Location:
Browse "engineer" Job By:
Browse "engineer" Job By: