200+ Electrical Engineering Jobs in Pulau Pinang - August 2026 - High Salaries

Showing 296 jobs results for "electrical engineering" in Pulau Pinang
Never miss any updates for Electrical Engineering jobs in Pulau Pinang
MYR1,800 - MYR2,800 Per Month
  • Kerja pemasangan paip (piping)
  • Penamatan FTTH
  • Penamatan UTP ...
Posted
21 days ago
MYR6,000 - MYR8,000 Per Month
  • Participate in new machine development from concept to machine release.
  • Work closely with software, mechanical, and vision engineers for machine integration.
  • Support machine assembly, testing, debugging, and troubleshooting activities. ...
Posted
22 days ago
MYR6,000 - MYR8,000 Per Month
  • Participate in new machine development from concept to machine release.
  • Work closely with software, mechanical, and vision engineers for machine integration.
  • Support machine assembly, testing, debugging, and troubleshooting activities. ...
Posted
22 days ago
Undisclosed
  • To assist FC/client representative to perform preparation for the planned maintenance in CMMS system. (Get ready permit-to-work, assist in supervision for the planned maintenance, ensure safety and health during carry job, escalation if needed)
  • Prepare facilities job report for every visit in log book or in softcopy if provided.
  • This include repair maintenance for pantry appliances (oven, fridge, related appliance) ...
Posted
24 days ago
Undisclosed

Prai

  • includes determining the correct simulation methodology and setup to use, as well as a good
  • understanding of the criteria for each interface.
  • Performing PCB design schematic and layout reviews ...
Posted
2 days ago
Undisclosed
  • Troubleshoot electrical faults.
  • Ensure compliance with safety regulations and statutory requirements.
  • Coordinate with contractors and vendors during maintenance activities. ...
Posted
a month ago
MYR2,000 - MYR3,000 Per Month
  • Provide maintenance and repair of the solar system products
  • Daily operation of entire facility, electrical and monitoring on low and high voltage facility equipment's performance
  • Registered Competent Electrical Chargeman Certificate under Category – A1 Chargeman (MUST) ...
Posted
a month ago
MYR2,500 - MYR6,500 Per Month
  • Follow coding standards, testing procedures, release workflows, and proper change management for machine upgrades and software modifications.
  • Identify technical risks, gaps, and opportunities for process improvement in control systems and project workflows.
  • Ensure cybersecurity, access control, and protection of project files and machine software. ...
Posted
a month ago
MYR2,500 - MYR6,500 Per Month
  • Follow coding standards, testing procedures, release workflows, and proper change management for machine upgrades and software modifications.
  • Identify technical risks, gaps, and opportunities for process improvement in control systems and project workflows.
  • Ensure cybersecurity, access control, and protection of project files and machine software. ...
Posted
a month ago
Undisclosed

George Town

  • Driving a strong safety culture and ensuring compliance with all legislative and company standards.
  • Improving workshop systems, maintenance processes and equipment reliability through continuous improvement initiatives.
  • Coordinating external contractors and suppliers while managing workshop priorities. ...
Posted
21 days ago
Undisclosed
  • Ensure compliance with electrical safety standards and relevant TNB, ST, and local authority regulations.
  • Liaise with project managers, engineers, and clients to ensure smooth execution and timely delivery of projects.
  • Prepare and maintain site documentation, reports, and as-built drawings. ...
Posted
25 days ago
Undisclosed

Prai

  • Make the engineering evaluation/proposal to the customer.
  • Create the detailed design including 2D/3D drawings and perform DFMEA/tolerance
  • analysis. ...
Posted
2 days ago
Undisclosed

Malaysia

  • Executes functionality & stability test plans for processors using hardware and software tools.
  • Collaborate with silicon design, FW, driver and other teams to debug PNP issues, drive issues to be fixed
  • Optimizes PNP implementation, the testing process, and issue debugging process ...
Posted
4 days ago
Undisclosed

George Town

  • RTL design structure for effective and efficient synthesis implementation
  • Derive timing constraints from design spec, review and validate with respective designer/architect for signoff
  • Design-For-Test (DFT) implementation, covering basic scan insertion, compression, LOC/LOS, RAMBIST all the way to advanced handling for performance/schedule/coverage trade-off ...
Posted
6 days ago
Undisclosed

Bandar Perai Jaya

  • Supports pilot manufacturing line in the assembly, testing and evaluation of new products.
  • Collaborate with R&D team and participate in the design, qualification, and implementation of new test processes.
  • Develops and maintains systematic debug guide documentation for responsible products. ...
Posted
7 days ago

FENGSHI METAL TECHNOLOGY MALAYSIA SDN BHD

MYR9,999 - MYR9,999 Per Month
  • Analyze equipment failures and implement effective corrective and preventive actions.
  • Improve machine reliability and overall equipment effectiveness (OEE).
  • Identify recurring equipment issues and propose engineering solutions. ...
Posted
8 days ago
Undisclosed

Malaysia

  • Executes functionality & stability test plans for processors using hardware and software tools.
  • Collaborate with silicon design, FW, driver and other teams to debug PNP issues, drive issues to be fixed
  • Optimizes PNP implementation, the testing process, and issue debugging process ...
Posted
8 days ago
Undisclosed
  • Ensure designs adhere to safety regulations and participate in hazard studies.
  • Perform FAT and SAT commission new equipment, manage vendor documents, and ensure projects stay within budget.
  • Prepare technical reports, data sheets, and maintenance procedures. ...
Posted
9 days ago

SAM Engineering & Equipment (M) Bhd

MYR3,500 - MYR5,500 Per Month
  • Develop, review, and improve maintenance procedures to enhance equipment reliability.
  • Conduct routine inspections to ensure machines, tools, and equipment are safe and operating efficiently.
  • Ensure all maintenance activities comply with company safety and health standards. ...
Posted
10 days ago
Undisclosed

Malaysia

  • THE PERSON:
  • Knowledgeable of PNP feature implementation and a strong desire to enable, validate and implement PNP features. Strong communication skills and capable of working both independently and in a team.
  • KEY RESPONSIBILITIES: ...
Posted
10 days ago
Undisclosed
  • Follow reliability engineering best practices.
  • Create customer facing reports for technical sharing as aligned with development quality and product marketing.
  • Participate in quality and reliability productivity and cost improvement programs. ...
Posted
11 days ago

BizLink Technology (S.E.A.) Sdn. Bhd.

Undisclosed
  • Strong problem-solving abilities, attention to detail, and the capacity to interpret technical drawings, manuals, and schematics.
  • Relevant technical diploma or degree in Mechanical, Electrical, Mechatronics, or a related engineering field, with experience in manufacturing or industrial environments preferred.
  • Knowledge of safety standards, 5S, and continuous improvement methodologies, with the ability to work collaboratively in cross-functional teams. ...
Posted
11 days ago
Undisclosed

Malaysia

  • Act as the primary point of contact for electrical power failures, equipment breakdowns and troubleshooting.
  • To carry out high voltage switching work and maintenance work according to the schedule.
  • Analyze energy usage, identifying opportunities for optimization and cost savings. ...
Posted
14 days ago

Air Products Malaysia Sdn

Undisclosed

Prai

  • Assist Senior Maintenance Engineer (North) to plan and schedule major maintenance activities to optimize utilization of all resources and facilitate safe, smooth and cost-effective execution within budget and schedule.
  • Assist Senior Maintenance Engineer (North) to plan and schedule turnarounds. Responsible as turnaround coordinator by organizing and lead maintenance resources. Chair turnaround meetings, reviews and prepares schedule, progress and post-turnaround review reports.
  • Assist Senior Maintenance Engineer (North) for predictive/preventive maintenance planning and scheduling. Ensure safe and effective execution and schedule compliant including reporting. Review effectiveness of predictive/preventive maintenance program (by using various tools – e.g. RCM, FMEA, etc. and inspection techniques – e.g. oil analyses, other NDT). Maintaining a mechanical integrity program, ensure compliant with corporate MI program. ...
Posted
16 days ago
Undisclosed

George Town

  • Assist Senior Maintenance Engineer (North) in support plant reliability improvement activities. Ensure action items are targeting at eliminating root causes in failures by using the effective tools such as FMEA, RCM or ARCA. Ensure follow-up actions are implemented promptly to closure.
  • To liaise closely for site regular preventive maintenance programs as per SAP PM02 and safe task execution methodologies.
  • To ensure that specific PPE and tools are routinely audited and inventory reported to the plant manager. ...
Posted
16 days ago
Undisclosed

Malaysia

  • Be available for overtime work when needed.
  • Experience in PM and major down troubleshooting.
  • Responsible to liaise with process engineering team for low yield triggering. ...
Posted
4 days ago
Undisclosed

Malaysia

  • Review assigned work orders and partner with available systems to track completion.
  • Support energy management by ensuring all building systems are operating efficiently.
  • Inspect existing installations for compliance with building codes and safety regulations. ...
Posted
5 days ago
Undisclosed
  • Coordinate with cross-functional teams to manage and execute multiple projects simultaneously.
  • Lead engineering activities to meet customer expectations and manufacturing requirements.
  • Develop and maintain product models, drawings, product specifications, Design Verification Plans and Reports (DVP&R), tolerance stack-up analyses, test summaries, and application specifications. ...
Posted
5 days ago