Jobs
Companies
Forums
100+ Design Engineer Jobs in Bayan Lepas - October 2026 - High Salaries
Showing 102 jobs results for
"design engineer"
in Bayan Lepas
Never miss any updates for Design Engineer jobs in Bayan Lepas
Manage Alert
Undisclosed
- Conceive and implement ways to enhance and extend operation of heat transfer hardware.
- Consider the thermal aspects of chip packaging technologies.
- Apply best-in-class fluid flow geometry and technology to cool high heat flux chips. ...
Posted
12 days ago
Undisclosed
- Provide training and technical assistance to peers/customers.
- Experience in Top/Block level ASIC PnR implementation (RTL to GDSII).
- Tape-out experience in lower nodes like 3nm, 5nm, 7nm, 10nm and above. ...
Posted
20 days ago
Undisclosed
- System validation including DVT (Design Validation Trial), SPIT (Signal, Power, Integrity & Timing) environmental & regulatory approval.
- Qualify alternative components for compatibility, cost effectiveness and benchmarking
- Support Manufacturing Engineering and Test Engineers on trouble shooting and resolving technical issues and root cause analysis ...
Posted
14 days ago
Undisclosed
- Perform physical verification (DRC/LVS), crosstalk analysis, and EM/IR checks to ensure design reliability and manufacturability.
- Collaborate with front-end design, STA, and power teams to resolve timing, congestion, and design rule issues efficiently.
- Develop and maintain methodology scripts (Tcl, Perl, or Python) to automate and streamline physical design and STA workflows. ...
Posted
4 days ago
Undisclosed
- Leads local continuous improvement activities associated with their engineering discipline and/or project-level tools or processes.
- Provides Customer Service leadership in project technical discussions, and support/lead business development and proposal creation.
- Responsible to exemplify and hold their team accountable to demonstrating the Plexus Core Values. Leader will focus on evaluating potential, driving succession planning, and ensuring their employees receive the development and coaching required to realize their full potential. (as applicable) ...
Posted
8 days ago
Undisclosed
- Technical Support & Training: Provide training to FAEs on IP principles and usage; support FAEs during customer application integration and debugging.
- Continuous Improvement: Gather market feedback to drive updates and upgrades for assigned IP portfolios.
- Education: Bachelor’s degree or above in Electronic Engineering, Microelectronics, Communications, or Computer Science. ...
Posted
22 days ago
Undisclosed
- : Hands-on expertise with Computer-Aided Design (CAD) tools (e.g., SolidWorks, AutoCAD, or similar) for 2D drawings and 3D modeling.
- : Mechanical Engineering or a related field, or equivalent practical experience.
- : Strong problem-solving skills, attention to detail, and the ability to work both independently and in multidisciplinary teams. ...
Posted
25 days ago
Undisclosed
- Perform simulation, debugging, validation and characterization.
- Review RF PCB layout, routing, grounding and shielding.
- Work with R&D, NPI, Software and Manufacturing teams. ...
Posted
12 days ago
Undisclosed
- Collaborate with RTL, architecture, and verification teams to improve physical implementation quality.
- Track execution progress and support activities to ensure on-time tape-out.
- Learn and apply best practices in advanced-node physical design. ...
Posted
13 days ago
Undisclosed
- Familiar with various high-speed interfaces such as PCIe, Ethernet (L1 – L4), USB, DDR, LVDS, etc.
- Familiar with various low speed interfaces such as SPI, I2C, UART, etc.
- Experience FPGA/RTL design on High-Speed Ethernet ...
Posted
6 days ago
Undisclosed
- Good understanding of timing concepts, Experience in Generating and Implementing ECOs to fix timing, noise, and EMIR violations.
- Experience in Tcl/Perl/Shell/Python programming, Mentor Calibre DRC/LVS/PERC, and Apache Totem EM & IR analysis is a plus.
- Familiar with mixed signal layout matching techniques, such as interdigitation, common centroid and dummies for matching, bypass capacitor design and optimization, power supply bus construction using star connections, critical route shielding, triple well layout, ESD device and cell layout, and guard ring layout methods. ...
Posted
a month ago
IDEAL VISION INTEGRATION SDN BHD
Undisclosed
- Manage system integrators, equipment suppliers, contractors and other external vendors to meet project objectives.
- Perform onsite system setup, troubleshooting and provide technical assistance to customers when necessary.
- Preferably in bachelor’s degree / Postgraduate in Mechanical / Mechatronics / Electrical & Electronic or equivalent. ...
Posted
a month ago
Undisclosed
- Assists project management in the development of proposals to ensure accurate technical, staffing, budgetary, and schedule content.
- Demonstrates effective communications (teleconference, email, and in-person) through interaction with customers (internal and external) regarding project technical subject matter.
- Responsible to exemplify and hold their team accountable to demonstrating the Plexus Core Values. Leader will focus on evaluating potential, driving succession planning, and ensuring their employees receive the development and coaching required to realize their full potential. (as applicable) ...
Posted
25 days ago
Undisclosed
- Perform floorplanning, placement, and routing while optimizing for area, performance, and manufacturability.
- Conduct thorough physical verification such as DRC, LVS, ERC including RV.
- Drive design reviews and provide technical mentorship to junior layout engineers. ...
Posted
a month ago
Undisclosed
- Perform floorplanning, placement, and routing while optimizing for area, performance, and manufacturability.
- Conduct thorough physical verification such as DRC, LVS, ERC including RV.
- Drive design reviews and provide technical mentorship to junior layout engineers. ...
Posted
a month ago
Aemulus Corporation Sdn Bhd
Undisclosed
- Familiar with stack-up design, controlled impedance routing, length matching, and high-speed layout as required.
- Analyze high-speed digital, analog, and mixed-signal paths to ensure optimal signal integrity.
- Conduct SI/PI simulation and analysis (e.g., crosstalk, EMI/EMC, noise sensitivity). ...
Posted
a month ago
Undisclosed
- Participate in hardware verification, debugging, troubleshooting, and performance evaluation activities.
- Assist in component selection, evaluation, and qualification.
- Work closely with hardware, software, firmware, FPGA, and mechanical engineers to support product development activities. ...
Posted
a month ago
Undisclosed
- Incorporate assembly rules (die placement, bump/ball pitch, solder joint reliability, warpage control) into package designs.
- Develop and validate Flip Chip package designs, including bump assignment, redistribution layers (RDL), and underfill considerations.
- Collaborate with Signal Integrity (SI), Power Integrity (PI), and thermal analysis teams to ensure robust performance. ...
Posted
a month ago
Undisclosed
- Conduct comprehensive testing and validation of recording media designs to ensure compliance with product specifications and industry standards.
- Collaborate with cross-functional teams including manufacturing, quality assurance, and product engineering to drive innovation and process improvements.
- Analyze manufacturing data and performance metrics to identify optimization opportunities and implement corrective actions. ...
Posted
a day ago
Undisclosed
- Conduct comprehensive testing and validation of recording media designs to ensure compliance with product specifications and industry standards.
- Collaborate with cross-functional teams including manufacturing, quality assurance, and product engineering to drive innovation and process improvements.
- Analyze manufacturing data and performance metrics to identify optimization opportunities and implement corrective actions. ...
Posted
a day ago
Undisclosed
- Conduct comprehensive testing and validation of recording media designs to ensure compliance with product specifications and industry standards.
- Collaborate with cross-functional teams including manufacturing, quality assurance, and product engineering to drive innovation and process improvements.
- Analyze manufacturing data and performance metrics to identify optimization opportunities and implement corrective actions. ...
Posted
4 days ago
Undisclosed
- Conduct comprehensive testing and validation of recording media designs to ensure compliance with product specifications and industry standards.
- Collaborate with cross-functional teams including manufacturing, quality assurance, and product engineering to drive innovation and process improvements.
- Analyze manufacturing data and performance metrics to identify optimization opportunities and implement corrective actions. ...
Posted
4 days ago
Undisclosed
- Cross-Functional Leadership: Drive technical problem-solving with system designers and cross-functional leads to align analog circuit models with broader product architectures.
- Tape-out Sign-off & Delivery: Serve as the final technical sign-off authority for tape-out readiness, ensuring complete physical verification and layout integrity (GDSII).
- Team Mentorship & Guidance: Mentor and guide circuit design engineers, encouraging technical excellence, best practices, and continuous learning within the team. ...
Posted
6 days ago
Undisclosed
- Conduct comprehensive testing and validation of recording media designs to ensure compliance with product specifications and industry standards.
- Collaborate with cross-functional teams including manufacturing, quality assurance, and product engineering to drive innovation and process improvements.
- Analyze manufacturing data and performance metrics to identify optimization opportunities and implement corrective actions. ...
Posted
17 days ago
Undisclosed
- Capable of handling multiple areas of IP Verification: RTL, Power Aware and Gate Level Verification
- Working with the team and functional leads; Some interaction with cross functional groups
- Bachelor’s degree or higher in Electrical and Electronics Engineering or related field ...
Posted
8 days ago
Undisclosed
- Perform functional, interface, performance, and system-level verification, including debugging and root-cause analysis of design issues.
- Support IP integration and SoC verification, working closely with design, architecture, and other engineering teams.
- Identify, analyze, and resolve verification issues to ensure design quality, stability, and reliable system operation. ...
Posted
13 days ago
Job searches related to “Design Engineer”
Browse Company:
More Companies
Browse "design engineer" Job By:
Browse "design engineer" Job By: