Jobs
Companies
Forums
300+ C&s Engineer Jobs in Pulau Pinang - September 2026 - High Salaries
Showing 315 jobs results for
"c&s engineer"
in Pulau Pinang
Never miss any updates for C S Engineer jobs in Pulau Pinang
Manage Alert
Undisclosed
George Town
- Work closely with physical design teams to provide necessary constraints (SDC) and guidance for synthesis, timing closure, and layout integration.
- Act as the primary technical point of contact for clients integrating IP, providing support for integration, debugging, and post-silicon validation.
- Drive the adoption of advanced EDA tools and automated design flows to improve design cycle efficiency and product quality. ...
Posted
24 days ago
Undisclosed
Malaysia
- Develop and optimize preventive and predictive maintenance strategies.
- Lead equipment qualification, installation, upgrades, and new equipment introduction activities.
- Monitor and analyze equipment performance indicators and provide recommendations for improvement. ...
Posted
13 hours ago
Undisclosed
- Drives quality standards, manages audits, and interfaces with customers on quality concerns.
- Set up process management plan for each product and make sure it been understood and followed.
- Guide related persons such as operator and inspector on quality standard and workmanship standard understanding. ...
Posted
18 days ago
XQwave Pvt Ltd (Formerly Obsidian Solutions Pvt Ltd)
Undisclosed
Malaysia
- Perform ECO implementation and timing optimization.
- Handle congestion, power, area, and performance optimization.
- Execute STA analysis and support signoff activities. ...
Posted
18 days ago
Undisclosed
George Town
- Lead supplier selection and qualification for cost savings and capacity expansion and provide alternative manufacturing component assembly strategies.
- Ensure suppliers can support future designs, quality standards, and capacity needs. Identify gaps in supplier capabilities and create improvement plans.
- Bachelor’s degree in field with 8+ years of related work experience OR Master’s degree in field with 6+ years of related work experience ...
Posted
19 days ago
Undisclosed
Malaysia
- Perform training as needed to Lower level Maintenance Techs on troubleshooting and repair techniques utilized with equipment
- Perform specified preventative maintenance on production equipment to prevent equipment downtime.
- Monitor equipment operations to ensure proper usage. ...
Posted
15 hours ago
Undisclosed
- Monitor key process output variables (KPOV) during production to ensure process stability and product quality.
- Perform process adjustments as needed to maintain specifications and resolve deviations.
- Assist in troubleshooting process and equipment issues to minimize downtime. ...
Posted
15 hours ago
Undisclosed
- Monitoring on hold lot disposition and provide communication with engineer in order to not impact daily assembly output.
- Maintain all housekeeping / 5s engineering station and tooling’s, to ensure compliance to safety rules.
- Monitor all processes, resolve all products issues and coordinate with production and equipment to reduce downtime and getting better product quality. ...
Posted
15 hours ago
Undisclosed
- Trouble-shooting of test-setup/ hardware and perform simple debugging on tester.
- Assist in various yield/ quality/ productivity/ product or process, improvement projects.
- Assist in new device/ system/ hardware qualifications and supervision of engineering lots. ...
Posted
15 hours ago
Undisclosed
George Town
- Review assigned work orders and partner with available systems to track completion.
- Support energy management by ensuring all building systems are operating efficiently.
- Inspect existing installations for compliance with building codes and safety regulations. ...
Posted
14 hours ago
Undisclosed
- Monitor key process output variables (KPOV) during production to ensure process stability and product quality.
- Perform process adjustments as needed to maintain specifications and resolve deviations.
- Assist in troubleshooting process and equipment issues to minimize downtime. ...
Posted
7 days ago
Undisclosed
George Town
- Data-Driven Problem Solving: Utilize data analysis skills, statistical tools, and Six Sigma methodologies to investigate test data, troubleshoot manufacturing bottlenecks, and optimize reliability.
- Continuous Improvement: Connect the dots between product design, test data, and the manufacturing process to continuously improve overall product performance and manufacturability.
- Education: Bachelor’s, Master’s, or Doctoral degree in Electronics Engineering or a related discipline. ...
Posted
20 days ago
Fastrain Technology Malaysia Sdn Bhd
MYR2,000 - MYR4,000 Per Month
Prai
- Meal allowance
- Parental leave
- 0 Responsibilities· Perform preventive maintenance (PM) on SMT PCB magazines according to the maintenance schedule.· Inspect magazines for physical damage, deformation, worn components, loose parts, and alignment issues.· Repair or replace damaged magazine components such as side guides, locking mechanisms, adjustment screws, rollers, and handles.· Clean magazines to remove dust, solder residue, labels, adhesives, and other contaminants.· Ensure magazines comply with ESD control requirements and company standards.· Verify magazine width adjustment and smooth operation before releasing them for production use.· Label and identify magazines with maintenance status and traceability information.· Segregate damaged magazines and coordinate repair or disposal when necessary.· Maintain sufficient magazine inventory to support production requirements.· Record maintenance activities, repairs, inspections, and spare part usage.· Report recurring failures and recommend improvement actions to reduce maintenance frequency.· Support continuous improvement (Kaizen/CIP) projects to improve magazine reliability and maintenance efficiency.· Ensure all maintenance work complies with safety regulations, 5S standards, and company procedures.· Assist production during urgent magazine replacement or troubleshooting. ...
Posted
9 days ago
MYR2,500 - MYR3,000 Per Month
Prai
- · Perform preventive and corrective maintenance on all electrical equipment and machinery.
- · Troubleshoot and repair electrical faults in production machines and plant facilities.
- · Install, test, and commission electrical equipment, motors, control panels, sensors, and lighting systems. ...
Posted
10 days ago
Undisclosed
Prai
- Perform specified preventative maintenance on production equipment to prevent equipment downtime.
- Monitor equipment operations to ensure proper usage.
- Construct and/or assemble new equipment ...
Posted
10 days ago
Undisclosed
Prai
- Perform specified preventative maintenance on production equipment to prevent equipment downtime.
- Monitor equipment operations to ensure proper usage.
- Construct and/or assemble new equipment ...
Posted
10 days ago
Undisclosed
- Act as liaison between Research and Development Teams and Manufacturing Operations Organization to provide potential corrective actions and feedback based on root cause determinations.
- Perform advanced unit, integration, and systems verification and validation testing using HW/SW tools. Review others testing methodologies and algorithms or hardware to ensure optimal test cases as needed.
- Work closely with other project team members as needed to ensure the final combined product has compatible software, electronic hardware, and mechanical hardware which functions properly together and performs at levels specified in the product specifications. ...
Posted
a month ago
Undisclosed
Prai
- Ensure project meeting the PAR expenses, lead time, capacity, and product quality expectation.
- Supporting technical documentation of the production processes.
- Optimizing production cost, process improvement and COPQ reduction. ...
Posted
a month ago
Undisclosed
- Responsible for all quality documentation as required for the manufacturing process
- Reorganize processes to improve the productivity of assembly lines
- Redesigning the jig and fixture/tooling to improve process and eliminate sources of repetitive motion injury (RMI) problems ...
Posted
a month ago
Undisclosed
- Demonstrate the ability to work independently with minimal supervision, communicate effectively, and adapt quickly to changing priorities.
- Drive and enforce strict process controls across all manufacturing operations to ensure quality, efficiency, and compliance.
- Establish robust, repeatable, and reproducible manufacturing processes, parameters, and control plans. ...
Posted
a month ago
Undisclosed
Prai
- Maintain mold qualification and process optimization records within Molex E-Doc systems to ensure traceability and future reference.
- Evaluate first article trial results against product drawing specifications, submit parts for internal qualification, identify dimensional issues, and collaborate with Mold and Product Designers to implement corrective actions and improvements.
- Document debugging findings, process troubleshooting activities, and lessons learned to support successful mold handovers to Production teams. ...
Posted
22 days ago
Undisclosed
Malaysia
- Bench testing and debugging of reliability test circuits / boards verification.
- Operation of measurement equipment such as curve tracer, oscilloscope and multimeters for supporting in-house calibration activities.
- Know-how in reliability stress testing eg. Environmental, Electrical/ Functional, and acoustics stress testing. ...
Posted
14 days ago
Undisclosed
George Town
- Troubleshoot process related issues. Act as a first line of defense in the module and in responding to process, equipment and measurement abnormality and deviations.
- Monitor and analyze Statistical Process Control (SPC) charts using SPACE and other tools; respond to process deviations and follow corrective action systems (CAS). Perform tasks according to out-of-control OCAP, Corrective Action System (CAS) with mindset of quality come-first.
- Assist in lot disposition and data collection for process and equipment faults; ensure accurate documentation and pass down. ...
Posted
23 days ago
Undisclosed
- Develop test solution and characterizing hardware prototype to ensure the design meeting required specifications.
- Work closely with project manager to ensure hardware design meeting the intended system performance, project cost and schedule.
- Regularly leading the design team in system hardware/FPGA and software integration project. ...
Posted
23 days ago
Undisclosed
Malaysia
- Set up new Underfill processes, materials, and recipes, including process window studies, DOE execution, and corner limit evaluations.
- Establish golden recipes for new package qualifications.
- Maintain Underfill recipe templates according to Positrol log guidelines. ...
Posted
a month ago
Undisclosed
- Drive gross margin improvement and value engineering initiatives, identifying cost-reduction opportunities through design optimization, process innovation, and supply base rationalization.
- Lead and influence cross-functional programs for new site qualification, manufacturing transfers, and supplier transitions, ensuring seamless execution, risk mitigation, and accelerated time-to-market.
- Act as a thought leader in materials engineering, proactively identifying emerging technologies, industry trends, and strategic opportunities to strengthen competitive advantage and operational excellence. ...
Posted
a month ago
Undisclosed
- Monitor Machine alarms, take appropriate action based on guidelines & instructions provided
- Carry out periodic samples house keeping & other tasks assigned by Engineer.
- Support & cooperate with other department to solve assembly issue /MES (Manufacturing Execution System). ...
Posted
16 days ago
Browse Location:
More Location
Browse Company:
More Companies
Browse "c&s engineer" Job By:
Browse "c&s engineer" Job By:
More Industries