300+ C&s Engineer Jobs in Pulau Pinang - July 2026 - High Salaries
Showing 362 jobs results for
"c&s engineer"
in Pulau Pinang
Never miss any updates for C S Engineer jobs in Pulau Pinang
Manage Alert
Undisclosed
Malaysia
- • Publish and maintain power supply verification status and data
- • Assist to debug and duplicate power system related issues
- • Create test plan and test report ...
Posted
10 days ago
Undisclosed
- Create, review, and coordinate Engineering Change Orders implementation with the CM partner and make process improvement recommendations.
- Acts as a primary interface with the Teradyne NPI Ops team / Engineering team during the release of a new assemblies or revisions to assemblies already in use.
- To work with the CM partner to drive operation improvement. ...
Posted
20 days ago
Undisclosed
George Town
- Data-Driven Problem Solving: Utilize data analysis skills, statistical tools, and Six Sigma methodologies to investigate test data, troubleshoot manufacturing bottlenecks, and optimize reliability.
- Continuous Improvement: Connect the dots between product design, test data, and the manufacturing process to continuously improve overall product performance and manufacturability.
- Education: Bachelor’s, Master’s, or Doctoral degree in Electronics Engineering or a related discipline. ...
Posted
10 days ago
Undisclosed
Malaysia
- Develop andmaintainprocess optimization and validation programs
- Evaluate current processes and provide recommendations
- To review & buyoff process CTQs data, PFMEA, control plan, SPC ...
Posted
10 days ago
Undisclosed
Malaysia
- Executes electrical & functional test plans for AMD processors using hardware & software validation tools, oscilloscopes, & logic analyzers.
- Debug of electrical & functional issues of the memory sub-system of new processors
- Provides detailed input into the platform definition & review of platform designs used in the silicon validation of new processors. ...
Posted
11 days ago
Undisclosed
- Technical Implementation & Testing Management: Lead commissioning and technical implementation of MES solutions; manage acceptance test creation, execution, and approval; monitor technical implementations and support during ramp‑up.
- Support & Collaboration : Collaborate closely with template and local teams, act as 2nd‑level support for template functions, and ensure effective engagement with MES partners and stakeholders.
- For a more senior position level, manage all aspects of a large scale, complex, or significant engineering project, from start to finish, so that it is completed on time and within budget. ...
Posted
20 days ago
Undisclosed
Malaysia
- · Bachelor + , Minimum of 6+ year hands-on industry experience in PC , laptop , Graphics , mother boards , server product test and issue debug .
- · Excellent communication skills including English ability in oral and written
- · Be able to work both independently and in a team . ...
Posted
11 days ago
Undisclosed
Malaysia
- A quick learner for new technologies. Excellent communication skill (both verbal and written), including Mandarin and English. Key performance skills include decision making, problem solving, teamwork.
- KEY RESPONSIBILITIES:
- · Study latest silicon and system features; understand new features in silicon, BIOS, firmware, SW etc., bring up new product. ...
Posted
11 days ago
Process Development (Test) Senior Technician - Associate Engineer Process Development (Test) Senior Technician - Associate Engineer
OSRAM Opto Semiconductors (Malaysia) Sdn. Bhd., Penang
Undisclosed
- Manage new produciton develop new system setup.
- Responsible to build material readiness and clear understand to DOE matrix on the engineering build.
- Diploma in Electronics/Electrical Engineering or equivalent ...
Posted
11 days ago
Undisclosed
Malaysia
- Set up process management plan for each product and ensure being understood and followed.
- Guide production personnel such as operator and inspector on quality standard and workmanship standard understanding.
- Data collecting and analysis, and drive improvement with data. ...
Posted
21 days ago
Undisclosed
George Town
- Review product development requirements for compatibility with processing methods to determine costs and schedules
- Integrates equipment and material capabilities to meet process module and technology specifications
- Drive CIP (Continuous improvement plans) to improve process performance indices ...
Posted
12 days ago
Undisclosed
George Town
- Review product development requirements for compatibility with processing methods to determine costs and schedules
- Integrates equipment and material capabilities to meet process module and technology specifications
- Drive CIP (Continuous improvement plans) to improve process performance indices ...
Posted
13 days ago
Undisclosed
Malaysia
- Involve in top 80% defect analysis from market complaint and compile the analysis report.
- Work with QM R&D / QM Operation - to provide input in the update of product / process risk document that initiated due to market complaint.
- Involve in CAPA / NCR / Planned Deviation as required. ...
Posted
23 days ago
Undisclosed
Malaysia
- Lead root cause analysis (RCA) and corrective/preventive actions (CAPA).
- Drive continuous improvement initiatives to improve burn-in efficiency, reliability screening effectiveness, and cost reduction.
- Provide timely disposition and technical support for production issues impacting shipment and manufacturing flow. ...
Posted
23 days ago
Undisclosed
Prai
- Ensure project meeting the PAR expenses, lead time, capacity, and product quality expectation.
- Supporting technical documentation of the production processes.
- Optimizing production cost, process improvement and COPQ reduction. ...
Posted
23 days ago
Undisclosed
- Programming skills (C++ and Python).
- Hands-on experience in FPGA RTL design, testbench development, logic verification, timing closure and debugging.
- Expert in one or more FPGA primitives such as embedded block RAM, DSP blocks, PLL, oscillators, I/O Gearing, configuration/security or power related silicon features. ...
Posted
23 days ago
Undisclosed
- Create, review, and coordinate Engineering Change Orders implementation with the CM partner and make process improvement recommendations.
- Acts as a primary interface with the Teradyne NPI Ops team / Engineering team during the release of a new assemblies or revisions to assemblies already in use.
- To work with the CM partner to drive operation improvement. ...
Posted
23 days ago
Undisclosed
George Town
- Maintain hardware database integrity including testers, handlers, probers, load boards, sockets, probe cards, cables, and spare parts.
- Perform asset audits, inventory reconciliation, and equipment utilization reviews.
- Design circuits and customized production tooling for IC final test, wafer probe, and module testing based on existing Microchip standards. ...
Posted
23 days ago
Undisclosed
Bandar Perai Jaya
- Supports pilot manufacturing line in the assembly, testing and evaluation of new products.
- Collaborate with R&D team and participate in the design, qualification, and implementation of new test processes.
- Develops and maintains systematic debug guide documentation for responsible products. ...
Posted
23 days ago
Undisclosed
- Participate in robotic cell design and automation system layout planning.
- Work closely with mechanical and electrical engineers to ensure smooth system integration.
- Perform cycle time optimization and robot reach study. ...
Posted
23 days ago
Undisclosed
George Town
- Identify root causes of production issues and implement corrective and preventive actions
- Lead Lean Six Sigma and 5S initiatives across the production floor
- Support capacity planning and equipment layout optimization ...
Posted
23 days ago
MYR3,000 - MYR4,500 Per Month
Prai
- Conduct risk assessments and develop mitigation strategies to address potential challenges in the New Product Introduction (NPI) process.
- Collaborate with the quality team to establish quality standards for new products and ensure compliance with regulatory requirements.
- Develop documentation to support production, including work instructions, flow charts, procedures, routings, and product labels. ...
Posted
23 days ago
Undisclosed
Malaysia
- Technical Expertise and Support: Provide leadership in electrical failure analysis (EFA), exploring new test method/EFAtechnique to addressRMAs, production, reliability, and DPPM improvement. Analyze test results and deliver reports to stakeholders with actionable insights for improvement.
- Technical Communication and Documentation:Develop and deliver clear, concise technical reports and documentation, including EFA, work instructions, test equipment guidelines, test reports, and specifications.
- NPI Support:Lead NPI projects, ensuring smooth transfer of test technology to mass production. ...
Posted
23 days ago
Versatile Creation Sdn Bhd
MYR5,000 - MYR5,000 Per Month
Malaysia
- Support equipment integration and ramp-up activities, including
- Conduct time studies, data analysis, and basic root-cause analysis, translating
- Assist in the implementation of Lean Manufacturing initiatives, such as 5S, ...
Posted
23 days ago
Undisclosed
George Town
- Assists in generating component specifications.
- Generate test protocols, monitor testing, issue qualification test reports and approve components for use in products.
- Provide input to Design Engineering on new component technology and assist in component selection with quality and reliability analysis. ...
Posted
17 days ago
Keysight Technologies, Inc.
Undisclosed
- Configure and improve automated builds (CI/CD), Jenkins build pipelines, nuget packaging and code signing using certificates (Venafi).
- Diagnose and resolve build failures including dependencies issue, environment differences, certificate problems.
- Develop software with a solid architecture using object-oriented principles and modular design patterns. ...
Posted
17 days ago
Undisclosed
- Monitor Machine alarms, take appropriate action based on guidelines & instructions provided
- Carry out periodic samples house keeping & other tasks assigned by Engineer.
- Support & cooperate with other department to solve assembly issue /MES (Manufacturing Execution System). ...
Posted
2 days ago
Undisclosed
Malaysia
- Bench testing and debugging of reliability test circuits / boards verification.
- Operation of measurement equipment such as curve tracer, oscilloscope and multimeters for supporting in-house calibration activities.
- Know-how in reliability stress testing eg. Environmental, Electrical/ Functional, and acoustics stress testing. ...
Posted
4 days ago
Undisclosed
- Facilitate small process improvement projects through collection and analyzing data and monitoring engineering trials.
- Entering and compiling data relating to metrology measurement.
- Training in the functions of the new project launches. ...
Posted
4 days ago
Undisclosed
- To actively participate in design verification testing and characterization of the product.
- Good knowledge in analog design for low-noise, high accuracy measurements. Deep understanding of ADC/ DAC architectures and sampling theory.
- Appreciation of performance trade-offs in measurement design for cost-sensitive and high-volume applications ...
Posted
18 days ago
Browse Location:
More Location
Browse Company:
More Companies
Browse "c&s engineer" Job By:
Browse "c&s engineer" Job By: