Jobs
Companies
Forums
300+ C&s Engineer Jobs in Pulau Pinang - August 2026 - High Salaries
显示353个工作的结果
"c&s engineer"
在 Pulau Pinang
不要错过任何 C S Engineer 的新工作机会 在 Pulau Pinang
管理提醒
Undisclosed
Malaysia
- Cross-Functional Integration: Work closely with physical design teams to provide necessary constraints (SDC) and guidance for synthesis, timing closure, and layout integration.
- Customer Support: Act as the primary technical point of contact for clients integrating our IP, providing support for integration, debugging, and post-silicon validation.
- Methodology Innovation: Drive the adoption of advanced EDA tools and automated design flows to improve design cycle efficiency and product quality. ...
Posted
11 hours ago
Undisclosed
- Manage project scope, cost, timelines, and resource requirements to achieve project objectives.
- Facilitate project planning, decision-making, and problem-solving across Engineering, Manufacturing, Supply Chain, Quality, Services, and other stakeholders.
- Identify, assess, and proactively mitigate project risks while balancing schedule, cost, quality, and feature requirements. ...
Posted
9 hours ago
Undisclosed
- Act as liaison between Research and Development Teams and Manufacturing Operations Organization to provide potential corrective actions and feedback based on root cause determinations.
- Perform advanced unit, integration, and systems verification and validation testing using HW/SW tools. Review others testing methodologies and algorithms or hardware to ensure optimal test cases as needed.
- Work closely with other project team members as needed to ensure the final combined product has compatible software, electronic hardware, and mechanical hardware which functions properly together and performs at levels specified in the product specifications. ...
Posted
3 days ago
Undisclosed
Prai
- Ensure project meeting the PAR expenses, lead time, capacity, and product quality expectation.
- Supporting technical documentation of the production processes.
- Optimizing production cost, process improvement and COPQ reduction. ...
Posted
4 days ago
MYR3,000 - MYR3,000 每月
- Liaise with third party for equipment calibration.
- Responsible for arranging third party process and quality related tests.
- Responsible for in-house calibration of equipment. ...
Posted
4 days ago
Undisclosed
- Demonstrate the ability to work independently with minimal supervision, communicate effectively, and adapt quickly to changing priorities.
- Drive and enforce strict process controls across all manufacturing operations to ensure quality, efficiency, and compliance.
- Establish robust, repeatable, and reproducible manufacturing processes, parameters, and control plans. ...
Posted
4 days ago
Undisclosed
- Ensuring stability and optimal performance on all networks including Incident handling.
- Planning and execution of network installations, maintenance and lifecycle activities.
- Coordination and control of external support/service providers. ...
Posted
4 days ago
Undisclosed
- Participate in robotic cell design and automation system layout planning.
- Work closely with mechanical and electrical engineers to ensure smooth system integration.
- Perform cycle time optimization and robot reach study. ...
Posted
4 days ago
MYR9,500 - MYR9,500 每月
- To participate in new product development discussion and contributes ideas and comments in the area of PCB assembly automation and process technology.
- To monitor the SPI/AOI/AXI inspection/detection windows and modify whenever necessary to increase machine capability and quality.
- To continuously review and improve strategy and technology in the SPI/AOI/AXI inspection processes. ...
Posted
5 days ago
OSRAM Opto Semiconductors (Malaysia) Sdn. Bhd., Penang
Undisclosed
- Responsible for the timely delivery of project results in appropriate quality and within the project budget.
- Analysis, evaluation and optimization of IT systems and processes.
- Responsible for software changes and their testing/implementation. ...
Posted
5 days ago
Undisclosed
- Collaborate with Quality, Supply Chain, Manufacturing, and Operations teams to resolve production, field, and supplier issues.
- Define, document, and maintain material and manufacturing specifications, supporting production changes and engineering change execution.
- Support supplier qualification activities, including material changes, alternate sourcing, and risk mitigation initiatives. ...
Posted
5 days ago
Undisclosed
Malaysia
- Participate in incident triage by collecting logs,validatingsymptoms, documenting troubleshooting steps, and escalating issues with clear technical details.
- Maintainaccuratenetwork documentation, diagrams, implementation notes, and handover details for assigned tasks.
- Work with peers, operations teams, vendors, and other IT functions to complete assigned service requests and project tasks on time and with quality. ...
Posted
5 days ago
Undisclosed
Malaysia
- Set up new Underfill processes, materials, and recipes, including process window studies, DOE execution, and corner limit evaluations.
- Establish golden recipes for new package qualifications.
- Maintain Underfill recipe templates according to Positrol log guidelines. ...
Posted
5 days ago
Undisclosed
George Town
- Review and approve plant operation EMOC from process perspective.
- Support relevant process expertise like P&ID markup, process design calculation, equipment sizing, pipeline pressure drop simulation, etc.
- Support new plant commissioning as needed. ...
Posted
5 days ago
Undisclosed
Malaysia
- Lead root cause analysis (RCA) and corrective/preventive actions (CAPA).
- Drive continuous improvement initiatives to improve burn-in efficiency, reliability screening effectiveness, and cost reduction.
- Provide timely disposition and technical support for production issues impacting shipment and manufacturing flow. ...
Posted
6 days ago
Undisclosed
Malaysia
- Lead root cause analysis (RCA) and corrective/preventive actions (CAPA).
- Drive continuous improvement initiatives to improve burn-in efficiency, reliability screening effectiveness, and cost reduction.
- Provide timely disposition and technical support for production issues impacting shipment and manufacturing flow. ...
Posted
6 days ago
Undisclosed
- Drive gross margin improvement and value engineering initiatives, identifying cost-reduction opportunities through design optimization, process innovation, and supply base rationalization.
- Lead and influence cross-functional programs for new site qualification, manufacturing transfers, and supplier transitions, ensuring seamless execution, risk mitigation, and accelerated time-to-market.
- Act as a thought leader in materials engineering, proactively identifying emerging technologies, industry trends, and strategic opportunities to strengthen competitive advantage and operational excellence. ...
Posted
6 days ago
Undisclosed
George Town
- Work on fab/assembly process improvement activities, supporting manufacturing ramp and perform risk assessment and risk mitigation for new product development.
- Lead product yield excursion. Define business impact, identify root cause and implement corrective actions.
- Analyze customer return, implement corrective actions and support OSAT audits ...
Posted
6 days ago
Undisclosed
- Technical Implementation & Testing Management: Lead commissioning and technical implementation of MES solutions; manage acceptance test creation, execution, and approval; monitor technical implementations and support during ramp‑up.
- Support & Collaboration : Collaborate closely with template and local teams, act as 2nd‑level support for template functions, and ensure effective engagement with MES partners and stakeholders.
- For a more senior position level, manage all aspects of a large scale, complex, or significant engineering project, from start to finish, so that it is completed on time and within budget. ...
Posted
6 days ago
Undisclosed
- Utilizes appropriate tools and equipment to perform necessary design work including design creation, design analysis, and design verification.
- Produces comprehensive project documentation based on the needs of the project and in accordance with the quality and change management procedures and guidelines.
- Bachelor’s Degree required with 1 or more years of related experience preferred. ...
Posted
7 days ago
MYR6,400 - MYR10,300 每月
- The ability to work in a fast-paced environment
- Certificate or higher, in any manufacturing or equivalent.
- At least 2 years of working experience in Manufacturing, Engineering & Production Skill or equivalent. ...
Posted
7 days ago
Undisclosed
- Create, review, and coordinate Engineering Change Orders implementation with the CM partner and make process improvement recommendations.
- Acts as a primary interface with the Teradyne NPI Ops team / Engineering team during the release of a new assemblies or revisions to assemblies already in use.
- To work with the CM partner to drive operation improvement. ...
Posted
7 days ago
Undisclosed
Prai
- Drive continuous improvement initiatives to enhance product quality, reduce defects, and improve operational efficiency
- Maintain and ensure QMS /ESD /MSA are in place and in compliance in his/her area of responsibility.
- Ensure quality functions are implemented and carried out in accordance with one’s RRE. ...
Posted
7 days ago
Undisclosed
- To participate in new product development discussion and contributes ideas and comments in the area of PCB assembly automation and process technology.
- To monitor the SPI/AOI/AXI inspection/detection windows and modify whenever necessary to increase machine capability and quality.
- To continuously review and improve strategy and technology in the SPI/AOI/AXI inspection processes. ...
Posted
8 days ago
Undisclosed
George Town
- Lead engineering design and calculations;
- Assist in tender planning, scheduling, and budgeting
- Prepare technical reports, presentation and proposals ...
Posted
8 days ago
Undisclosed
Prai
- Analyze production data (e.g., process capability, reliability, control charts) to identify improvement opportunities and optimize processes.
- Investigate operational issues, troubleshoot manufacturing problems, and implement sustainable solutions.
- Apply lean manufacturing principles to improve production yield, reduce waste, and lower overall manufacturing costs. ...
Posted
9 days ago
Undisclosed
George Town
- Ensure that new products introduced to the production floor meet business, quality, output and cost goals and objectives
- Develop and modify various manufacturing processes to improve product and process quality and output
- Ensure product/process requirements are met for component, assembly, tooling and supplier specifications ...
Posted
9 days ago
Undisclosed
George Town
- Engineering process owner for the area
- Develop and modify manufacturing documentation and procedures to support commercial products as well as the introduction of new products to the production floor (assembly procedures, BOMs, etc.)
- Ensure that new products introduced to the production floor meet business, quality, output and cost goals and objectives ...
Posted
9 days ago
浏览公司:
查看更多公司
按"c&s engineer"浏览工作: