300+ C&s Engineer Jobs in Pulau Pinang - July 2026 - High Salaries
Showing 359 jobs results for
"c&s engineer"
in Pulau Pinang
Never miss any updates for C S Engineer jobs in Pulau Pinang
Manage Alert
Undisclosed
- Successfully executes responsibilities under supervision in accordance with good manufacturing practices and Plexus' Manufacturing Processes AND provide support to direct production line operators as it applies to their role.
- Basic Understanding of Equipment / Process control / Safety / Risk Awareness / setup awareness / operation of, as it applies to their role.
- Associate’s Degree with 1 or more years of related experience is preferred. An equivalent combination of education and/or experience will be considered. ...
Posted
17 days ago
Undisclosed
- Carry out Part Approval, MN, and ECR/ECO change.
- Engineering Spec/documents review & develop (Control Plan, PFMEA, SOP).
- Equipment set-up & sourcing for new manufacturing process equipment or upgrade. ...
Posted
a month ago
Undisclosed
- Facilitate small process improvement projects through collection and analyzing data and monitoring engineering trials.
- Entering and compiling data relating to metrology measurement.
- Training in the functions of the new project launches. ...
Posted
19 days ago
Undisclosed
George Town
- Lead supplier selection and qualification for cost savings and capacity expansion and provide alternative manufacturing component assembly strategies.
- Ensure suppliers can support future designs, quality standards, and capacity needs. Identify gaps in supplier capabilities and create improvement plans.
- Bachelor’s degree in field with 8+ years of related work experience OR Master’s degree in field with 6+ years of related work experience ...
Posted
25 days ago
Undisclosed
Malaysia
- Assisting as part of manufacturing team in modifying existing equipment or designing new equipment for continual manufacturing process improvement, as well as quality control and in-process production testing.
Posted
19 days ago
Undisclosed
Malaysia
- Ensure spec compliance and follow OCAP for machine troubleshooting.
- Demonstrates flexibility/adaptability to frequent changes.
- Able to work in a rotational shift work as and when needed. ...
Posted
19 days ago
Undisclosed
- Conduct routine equipment maintenance and troubleshooting
- Prepare samples for analysis using appropriate techniques
- Record and analyze test results with accuracy and attention to detail ...
Posted
20 days ago
Undisclosed
- Conduct routine equipment maintenance and troubleshooting
- Prepare samples for analysis using appropriate techniques
- Record and analyze test results with accuracy and attention to detail ...
Posted
20 days ago
Undisclosed
- To actively participate in design verification testing and characterization of the product.
- Good knowledge in analog design for low-noise, high accuracy measurements. Deep understanding of ADC/ DAC architectures and sampling theory.
- Appreciation of performance trade-offs in measurement design for cost-sensitive and high-volume applications ...
Posted
25 days ago
Undisclosed
Malaysia
- Develop and maintain process optimization and validation programs
- Evaluate current processes and provide recommendations
- To review & buyoff process CTQs data, PFMEA, control plan, SPC ...
Posted
25 days ago
Advanced Energy Industries, Inc.
Undisclosed
- Experience in auditing, qualifying, and selecting suppliers.
- Some travel will be required.
- Good oral and writing skills in English. ...
Posted
25 days ago
RICHPORT TECHNOLOGY SDN. BHD.
MYR2,000 - MYR2,000 Per Month
- Proficient in the use of hand tools, power tools, and diagnostic equipment
- Excellent problem-solving and critical-thinking skills
- Attention to detail and a commitment to safety ...
Posted
20 days ago
Undisclosed
George Town
- Interfaces with Customers, Teams, and Associates
- Conducts TSG Technical Disaster Recovery Procedures
- Addresses Customer Requests ...
Posted
20 days ago
Undisclosed
- Perform scheduled preventive maintenance activities in accordance with established maintenance plans.
- Conduct routine inspections, cleaning, lubrication, and basic system adjustments.
- Identify and report abnormal operating conditions, recommending corrective actions when needed. ...
Posted
20 days ago
Undisclosed
- Conduct routine equipment maintenance and troubleshooting
- Prepare samples for analysis using appropriate techniques
- Record and analyze test results with accuracy and attention to detail ...
Posted
21 days ago
Undisclosed
- Establish, track, and continuously improve supplier KPIs (e.g., defect rate, yield impact, responsiveness, audit scores), and drive accountability through regular business reviews (QBRs/MBRs).
- Lead supplier qualification activities, including technical capability assessment, process audits, and quality system evaluation
- Define and optimize incoming inspection strategies based on risk assessment and supplier performance. ...
Posted
a month ago
Undisclosed
George Town
- Troubleshoot equipment issues during development, pilot production, and mass production.
- Improve equipment stability, uptime, repeatability, positioning accuracy, cutting quality, and productivity.
- Develop, review, modify, or troubleshoot PC-based equipment control programs, preferably using C#. ...
Posted
22 days ago
Lattice Semiconductor
Undisclosed
- Hands-on experience in SoC and/or FPGA RTL design, testbench development, logic verification, timing closure and debugging in accordance with functional safety requirements.
- Demonstrate technical ownership of safety related SoC and/or FPGA Soft IP development and verification with proven ability to generate audit ready Functional Safety evidence in compliance with IEC 61508, ISO 26262 or other safety standards.
- Working knowledge of any FPGA primitives such as embedded block RAM, DSP blocks, PLL, oscillators, I/O Gearing, configuration/security or power related silicon features is a plus. ...
Posted
a month ago
Undisclosed
- Establish, track, and continuously improve supplier KPIs (e.g., defect rate, yield impact, responsiveness, audit scores), and drive accountability through regular business reviews (QBRs/MBRs).
- Lead supplier qualification activities, including technical capability assessment, process audits, and quality system evaluation
- Define and optimize incoming inspection strategies based on risk assessment and supplier performance. ...
Posted
a month ago
Undisclosed
Bandar Perai Jaya
- Execute preventive maintenance (PM) activities according to schedule.
- Troubleshoot and rectify equipment and system failures.
- Support emergency response for facilities system failures. ...
Posted
23 days ago
Undisclosed
Malaysia
- Trouble-shooting of test-setup/ hardware and perform simple debugging on tester.
- Assist in various yield/ quality/ productivity/ product or process, improvement projects.
- Assist in new device/ system/ hardware qualifications and supervision of engineering lots. ...
Posted
24 days ago
Undisclosed
Prai
- Monitor equipment operations to ensure proper usage.
- Construct and/or assemble new equipment.
- Troubleshoot equipment failures and repair as needed. ...
Posted
24 days ago
Undisclosed
Prai
- Perform specified preventative maintenance on production equipment to prevent equipment downtime.
- Monitor equipment operations to ensure proper usage.
- Construct and/or assemble new equipment. ...
Posted
24 days ago
Undisclosed
Prai
- Perform specified preventative maintenance on production equipment to prevent equipment downtime.
- Monitor equipment operations to ensure proper usage.
- Construct and/or assemble new equipment. ...
Posted
24 days ago
Undisclosed
Malaysia
- Perform specified preventative maintenance on production equipment to prevent equipment downtime.
- Monitor equipment operations to ensure proper usage.
- Construct and/or assemble new equipment. ...
Posted
24 days ago
Undisclosed
- Document routine preventive maintenance and unscheduled failures details on system database
- Provide inputs to Shift Coordinator or Equipment Engineer to improve PM cycle-time, tool availability, quality/workmanship, reduce media scrap and cost of ownership.
- Provide Technical training and certification for junior technician. ...
Posted
17 hours ago
Undisclosed
- Document routine preventive maintenance and unscheduled failures details on system database
- Provide inputs to Shift Coordinator or Equipment Engineer to improve PM cycle-time, tool availability, quality/workmanship, reduce media scrap and cost of ownership.
- Provide Technical training and certification for junior technician. ...
Posted
4 days ago
Undisclosed
- New equipment installation or setup propagation
- Support major equipment issue troubleshooting and spare parts inventory control
- Provide training to the production operator ...
Posted
5 days ago
Undisclosed
- New equipment installation or setup propagation
- Support major equipment issue troubleshooting and spare parts inventory control
- Provide training to the production operator ...
Posted
6 days ago
Undisclosed
- Monitor Machine alarms, take appropriate action based on guidelines & instructions provided
- Carry out periodic samples house keeping & other tasks assigned by Engineer.
- Support & cooperate with other department to solve assembly issue /MES (Manufacturing Execution System). ...
Posted
24 days ago
Browse Location:
More Location
Browse Company:
More Companies
Browse "c&s engineer" Job By:
Browse "c&s engineer" Job By: