- Singapore
ALLEVIATIVE ENGINEERING PTE. LTD. Hiring! Full Time Executive (Costing - Drafting) in , Earn up to SGD 4,000 - Ricebowl
Share
Save
Working Location
Job Description
Responsibilities
Alleviative Engineering Pte. Ltd.
We are looking for an Executive (Costing & Drafting) to support our M&E tendering and project operations.
This is a combined role covering both M&E drafting and costing / quantity take-off. The candidate should be able to understand drawings, prepare practical M&E drawings, extract quantities accurately and assist in preparing project costing and quotations.
Key Responsibilities
Drafting & Drawing Coordination
Prepare and revise M&E drawings using AutoCAD.
Prepare:
Shop drawings
Coordination drawings
Installation drawings
Layout drawings
Schematic drawings
Single-line diagrams
Detail drawings
As-built drawings
Update drawings based on site conditions, project revisions and consultant comments.
Coordinate M&E drawings with architectural, structural and other services.
Identify clashes, discrepancies, missing information and drawing inconsistencies.
Assist engineers and project teams with drawings required for submission and site execution.
Carry out site measurement and verification when required.
Maintain proper drawing revision and document records.
Costing & Quantity Take-Off
Review tender drawings, specifications, BOQ and project requirements.
Carry out detailed quantity take-off for M&E works.
Prepare measurable and structured costing based on actual project scope.
Prepare BOQ, material schedules and cost breakdowns.
Assist in preparing quotations, tender submissions and revised quotations.
Obtain and compare supplier and subcontractor quotations.
Check quotations against required quantities, specifications and scope.
Identify missing items, exclusions, discrepancies and potential cost impact.
Assist in preparing costing for variations and additional works.
Update quantities and costing when drawings or project requirements change.
Project Support
Coordinate with engineers, supervisors, suppliers and subcontractors.
Support material planning and procurement preparation.
Assist in preparation of RFQs and technical submissions.
Verify site conditions where necessary before finalising drawings or quantities.
Support project teams with drawing, quantity and costing information.
Maintain proper project, tender and costing documentation.
M&E Systems
The candidate may be required to work on:
ACMV systems
Electrical systems
Fire Protection systems
ELV / BMS systems
M&E coordination works
Associated builder's works and service routing
Requirements
Diploma / Degree / Technical qualification in Mechanical Engineering, Electrical Engineering, Building Services, Quantity Surveying, Drafting or related discipline.
Proficient in AutoCAD.
Good working knowledge of Microsoft Excel.
Able to read and understand M&E, architectural and structural drawings.
Able to carry out quantity take-off accurately.
Basic understanding of M&E construction and installation works.
Able to prepare organised BOQ and costing worksheets.
Relevant experience with an M&E contractor or construction company will be an advantage.
Fresh graduates with suitable technical knowledge, AutoCAD skills and willingness to learn may also be considered.
Candidate Attributes
We are looking for someone who is:
Careful and accurate with both drawings and figures.
Able to understand the actual scope before preparing drawings or costing.
Responsible and able to meet deadlines.
Organised in maintaining drawings, quotations and project documents.
Willing to learn different M&E systems.
Able to identify discrepancies instead of simply copying information.
Comfortable communicating with engineers, supervisors, suppliers and subcontractors.
Willing to attend site for measurement and verification when required.
Able to work independently after proper guidance.
Willing to take ownership of assigned work.
Role Focus
This is a combined M&E Costing and Drafting role.
The successful candidate is expected to develop competence in both areas and understand the relationship between:
Drawing → Quantity → Material → Labour → Cost → Actual Site Installation
The objective is to support AEPL in preparing accurate drawings, quantities and costing for both tendering and project execution.
Alleviative Engineering Pte. Ltd. is a construction firm founded on the core values of ownership, collaboration, excellence, and high performance. We are dedicated to delivering exceptional service to both our clients and our team. Committed to raising the bar in the industry, we consistently aim to surpass expectations and ensure the success of every project we handle. Our vision is to foster long-term partnerships with our clients by providing reliable, high-quality contracting services that go beyond their objectives, driving shared progress and innovation
We are looking for an Executive (Costing & Drafting) to support our M&E tendering and project operations.
This is a combined role covering both M&E drafting and costing / quantity take-off. The candidate should be able to understand drawings, prepare practical M&E drawings, extract quantities accurately and assist in preparing project costing and quotations.
Key Responsibilities
Drafting & Drawing Coordination
Prepare and revise M&E drawings using AutoCAD.
Prepare:
Shop drawings
Coordination drawings
Installation drawings
Layout drawings
Schematic drawings
Single-line diagrams
Detail drawings
As-built drawings
Update drawings based on site conditions, project revisions and consultant comments.
Coordinate M&E drawings with architectural, structural and other services.
Identify clashes, discrepancies, missing information and drawing inconsistencies.
Assist engineers and project teams with drawings required for submission and site execution.
Carry out site measurement and verification when required.
Maintain proper drawing revision and document records.
Costing & Quantity Take-Off
Review tender drawings, specifications, BOQ and project requirements.
Carry out detailed quantity take-off for M&E works.
Prepare measurable and structured costing based on actual project scope.
Prepare BOQ, material schedules and cost breakdowns.
Assist in preparing quotations, tender submissions and revised quotations.
Obtain and compare supplier and subcontractor quotations.
Check quotations against required quantities, specifications and scope.
Identify missing items, exclusions, discrepancies and potential cost impact.
Assist in preparing costing for variations and additional works.
Update quantities and costing when drawings or project requirements change.
Project Support
Coordinate with engineers, supervisors, suppliers and subcontractors.
Support material planning and procurement preparation.
Assist in preparation of RFQs and technical submissions.
Verify site conditions where necessary before finalising drawings or quantities.
Support project teams with drawing, quantity and costing information.
Maintain proper project, tender and costing documentation.
M&E Systems
The candidate may be required to work on:
ACMV systems
Electrical systems
Fire Protection systems
ELV / BMS systems
M&E coordination works
Associated builder's works and service routing
Requirements
Diploma / Degree / Technical qualification in Mechanical Engineering, Electrical Engineering, Building Services, Quantity Surveying, Drafting or related discipline.
Proficient in AutoCAD.
Good working knowledge of Microsoft Excel.
Able to read and understand M&E, architectural and structural drawings.
Able to carry out quantity take-off accurately.
Basic understanding of M&E construction and installation works.
Able to prepare organised BOQ and costing worksheets.
Relevant experience with an M&E contractor or construction company will be an advantage.
Fresh graduates with suitable technical knowledge, AutoCAD skills and willingness to learn may also be considered.
Candidate Attributes
We are looking for someone who is:
Careful and accurate with both drawings and figures.
Able to understand the actual scope before preparing drawings or costing.
Responsible and able to meet deadlines.
Organised in maintaining drawings, quotations and project documents.
Willing to learn different M&E systems.
Able to identify discrepancies instead of simply copying information.
Comfortable communicating with engineers, supervisors, suppliers and subcontractors.
Willing to attend site for measurement and verification when required.
Able to work independently after proper guidance.
Willing to take ownership of assigned work.
Role Focus
This is a combined M&E Costing and Drafting role.
The successful candidate is expected to develop competence in both areas and understand the relationship between:
Drawing → Quantity → Material → Labour → Cost → Actual Site Installation
The objective is to support AEPL in preparing accurate drawings, quantities and costing for both tendering and project execution.
Alleviative Engineering Pte. Ltd. is a construction firm founded on the core values of ownership, collaboration, excellence, and high performance. We are dedicated to delivering exceptional service to both our clients and our team. Committed to raising the bar in the industry, we consistently aim to surpass expectations and ensure the success of every project we handle. Our vision is to foster long-term partnerships with our clients by providing reliable, high-quality contracting services that go beyond their objectives, driving shared progress and innovation
Important Information
Never provide your bank or credit card details when applying for jobs. Do not transfer any money or complete unrelated online surveys. If you see something suspicious, Report this Job ad.
Learn More