2,700+份Technician工作在Pulau Pinang - October 2026
显示2,733个工作的结果
"technician"
在 Pulau Pinang
MYR2,000 - MYR2,500 每月
- With or without experience; fresh graduates are encouraged to apply
- Diploma/Certificate in Electrical & Mechanical (for Technician)
- Able to work on a shift basis ...
Posted
7 days ago
MYR2,000 - MYR2,800 每月
- Certificate, Diploma in Mechanical, Electrical, Mechatronic, Automation, or a related engineering field.
- 1- 2 years of technical or maintenance experience preferred.
- Fresh graduates are welcome to apply. ...
Posted
20 days ago
Undisclosed
- At least a SPM, Certificate in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical). Fresh graduate of Diploma or higher qualification is accepted.2. 0 - 2 year(s) of working experience in the related field is required for this position.3. Hands-on skill in mechanical or electrical assembly.
最后机会申请此工作。
Posted
17 days ago
MYR2,300 - MYR3,500 每月
- Diploma or Bachelor's Degree in Engineering, preferably Mechanical or Civil Engineering.
- Minimum 1 year of experienceas a QA Engineer or in a similar quality-related role, preferably within themanufacturing or steel industry.
- Strong knowledge of basic Quality Control (QC) tools. ...
最后机会申请此工作。
Posted
8 days ago
MYR2,200 - MYR2,500 每月
Fresh Graduates
- Diploma- Electronics Engineering/Electrical Engineering/Mechatronics Engineering/Mechanical Engineering/Industrial Technology/ Or a related technical discipline
- Willing to work shift
- Proficiency in English ...
最后机会申请此工作。
Posted
23 days ago
Undisclosed
- Diploma/Certificate in Electrical, Electronics, Mechanical Engineering, Mechatronics, or a related field.
- Basic knowledge of electrical, mechanical, pneumatic, and automation systems.
- Able to perform equipment installation, setup, preventive maintenance, and troubleshooting. ...
最后机会申请此工作。
Posted
23 days ago
Undisclosed
- Welding training, Non-Destructive Test Training, Welding Inspection Training, Geometric Dimensioning & Tolerance, QC tools, CMM or any high accuracy measuring equipment training.
- Preferably 2 to 4 years working experience in hands-on quality inspection of fabrication on Metal Works or manufacturing field.
- Experience in metal works / welding environment preferred. Able to work independently with minimal supervision. ...
最后机会申请此工作。
Posted
23 days ago
MYR3,000 - MYR4,500 每月
- Minimum 2 years experience operating laser cutting machines.
- Precision sheet metal, machining, or fabrication industries.
- Minimum 2 years experience operating laser cutting machines. ...
最后机会申请此工作。
Posted
17 days ago
MYR2,800 - MYR4,000 每月
+额外补偿
- 1+ year experience in removable dentures (experience level flexible for the right attitude).
- Strong craftsmanship mindset and problem-solving skills.
- Ability to stay focused and organised in a fast-paced lab environment. ...
最后机会申请此工作。
Posted
3 days ago
MYR3,500 - MYR4,500 每月
Fresh Graduates
- Degree in Building or Civil Engineering
- Min. 2 years' experience as a site/project engineer in the related field of work.
- Possess good interpersonal and communication skills with innovative thinking ...
Posted
3 days ago
Undisclosed
- Degree in Mechanical/Electrical/Mechatronics/Manufacturing Engineering field or equivalent years to related experience.2. Min 5 years working experience in clean room environment, exposure in Semicon industry.3. Experience managing security personnel, vendors, and contractors.4. Familiar with manufacturing facility security and regulatory.5. Strong leadership and team management skills.6. Good knowledge of access control, CCTV, alarm systems, and security technology.7. Excellent incident investigation and report writing skills.8. Good planning and organizational skills with attention to detail.9. Ability to handle emergencies calmly and decisively.10. Proficient in Microsoft Office for reporting and documentation.
最后机会申请此工作。
Posted
17 days ago
Undisclosed
- Degree in Mechanical Engineering/Mechatronic/Manufacturing or equivalent years of related experience.
- Minimum 2 to 5 years working experience in hands-on quality assurance of fabrication on Metal Works & CNC Machining. Supplier quality engineer role. Supplier monitoring & development management.
- Work independently & communicate well with internal & external process owner. ...
最后机会申请此工作。
Posted
23 days ago
Undisclosed
- Degree in Mechanical Engineering/Mechatronic/Manufacturing or equivalent years of related experience.
- Minimum of >5 to 8 years working experience in hands-on quality assurance of fabrication on Metal Works & CNC Machining.
- Supplier quality engineer role. ...
最后机会申请此工作。
Posted
17 days ago
MYR1,700 - MYR2,500 每月
- Carry out installation, upgrade, maintenance, testing and commissioning works at site as assigned.
- Perform troubleshooting and corrective works for CCTV systems and related equipment.
- Support site activities according to project schedules and requirements. ...
-Willing and able to travel between project sites within the Northern Zone.
-Willing to work after hours
+4
最后机会申请此工作。
Posted
a month ago
MYR2,500 - MYR3,000 每月
Fresh Graduates
- Having at least 1 years of basic experience in factory work, assembly, or plastic processing
- Ability to use basic hand tools and understand simple instructions
- Having at least 1 years of basic experience in factory work, assembly, or plastic processing ...
最后机会申请此工作。
Posted
10 days ago
Bending Technician/ Operator
MYR1,700 - MYR3,000 每月
- Possess knowledge and minimum 2 years experience in punching/ laser cutting process.
- PT3/ SPM equivalent or technical certificate
- Eye-hand coordination and manual dexterity ...
Posted
22 days ago
MYR2,000 - MYR3,000 每月
- Chargeman Certificate (AO or equivalent) or Wireman (PW4 or equivalent)
- Hands-on experience or knowledge of solar panel installation procedures and best practices
- Proficient in electrical wiring and basic electrical troubleshooting ...
Posted
2 days ago
MYR2,000 - MYR2,800 每月
+额外补偿
- Minimum education is Certificates / Vocational / Diploma in any related field
- Certificate in E&E (Electrical & Electronics) or Mechanical or equivalent.
- Good practical knowledge of aircond servicing, electrical systems and wiring. ...
Posted
a month ago
MYR5,000 - MYR6,000 每月
- 本科或以上学历，理工科相关专业，具有1年以上工作经验；有同行业工作经验者优先。
- 熟练使用质量工具进行数据分析及异常处理，例如 MSA、SPC、FMEA、8D、4M1E、APQP 等。
- 语言要求：熟练掌握中文和英文，具备良好的听说读写能力。 ...
最后机会申请此工作。
Posted
18 hours ago
MYR2,100 - MYR4,000 每月
Fresh Graduates
- Diploma or Equivalence qualification in Electronic or Mechatronic
- Punctuality and good working attitude.
- Must be willing to work on rotating shift and night shift when required. ...
Posted
16 days ago
MYR4,000 - MYR4,200 每月
Air Hitam, Pulau Pinang
- * 3年以上项目协调、项目管理、计划管理或销售运营经验。
- * 拥有IT、项目管理、商业或相关领域的学士学位者优先。
- * 具备出色的沟通、利益相关者管理、组织和解决问题的能力。 ...
最后机会申请此工作。
Posted
8 days ago
MYR2,000 - MYR5,000 每月
- 具备相关工作经验
- 熟悉机械设计相关工作
- 工作认真、细心、有责任感 ...
最后机会申请此工作。
Posted
2 days ago
Marketing & Engineering
MYR2,000 - MYR2,500 每月
Fresh Graduates
- Certificates/ Diploma/Degree in Mechanical Engineering, Manufacturing Engineering, Mechatronics, Precision Engineering or related field.
- Fresh graduates are welcome to apply.
- Experience in precision engineering, CNC machining or quotation/costing is an advantage. ...
Posted
2 days ago
MYR3,500 - MYR5,000 每月
Fresh Graduates
- Bachelor's Degree in Engineering, Quality Management, Manufacturing, Science, or a related discipline.
- Minimum 3 years of experience in Quality Assurance, Quality Control, or Manufacturing Quality within the labels, packaging, printing, or related industry.
- Experience in ISO 9001 certified manufacturing environments is preferred. ...
最后机会申请此工作。
Posted
2 days ago
MYR3,500 - MYR5,000 每月
Fresh Graduates
- Bachelor's Degree in Engineering, Quality Management, Manufacturing, Science, or a related discipline.
- Minimum 3 years of experience in Quality Assurance, Quality Control, or Manufacturing Quality within the labels, packaging, printing, or related industry.
- Experience in ISO 9001 certified manufacturing environments is preferred. ...
最后机会申请此工作。
Posted
2 days ago
MYR2,000 - MYR2,500 每月
Fresh Graduates
- Diploma/Advanced Diploma in Electrical/Electronic Engineering, Physics, or related fields.
- Fresh graduates are welcome!
- Basic troubleshooting and analytical skills. ...
最后机会申请此工作。
Posted
a month ago
MYR3,500 - MYR5,000 每月
Fresh Graduates
- Bachelor's Degree in Engineering, Quality Management, Manufacturing, Science, or a related discipline.
- Minimum 3 years of experience in Quality Assurance, Quality Control, or Manufacturing Quality within the labels, packaging, printing, or related industry.
- Experience in ISO 9001 certified manufacturing environments is preferred. ...
最后机会申请此工作。
Posted
2 days ago
MYR3,500 - MYR5,000 每月
Fresh Graduates
- Bachelor's Degree in Engineering, Quality Management, Manufacturing, Science, or a related discipline.
- Minimum 3 years of experience in Quality Assurance, Quality Control, or Manufacturing Quality within the labels, packaging, printing, or related industry.
- Experience in ISO 9001 certified manufacturing environments is preferred. ...
最后机会申请此工作。
Posted
2 days ago
MYR2,200 - MYR2,500 每月
+额外补偿
Fresh Graduates
- Technician or Freshie from Diploma / Degree Electrical or Electronic or Mechatronic
- Excellent working knowledge of semiconductor manufacturing equipment, especially RF Matching Networks and Generators
- Able to work on shift ...
最后机会申请此工作。
Posted
a month ago
Job searches related to “Technician”