jobs in Hammer Engineering

全职 Project Manager 工作, 薪水 up to MYR 10,000, Hammer Engineering Selangor 公司招聘中 - Ricebowl

分享
保存

工作地点

  • Shah Alam Selangor Malaysia

职位描述

岗位职责

The Project Manager is accountable for the end-to-end delivery of fuel gas metering and fuel gas train / conditioning packages, from contract award through engineering, procurement, fabrication, FAT, installation, commissioning and handover. Packages typically serve gas turbines, gas engines, boilers and industrial burners, and include fiscal, custody transfer, allocation or check metering. The role owns safety, technical integrity, measurement performance, schedule, cost and margin, and is the primary point of contact for the client on assigned projects.

DUTIES & RESPONSIBILITIES OF THIS ROLE

A. Project Leadership & Delivery

1. Full ownership of assigned projects, from contract award and kick-off through to final handover and close-out, with accountability for safety, quality, schedule, cost and margin.

2. Prepare and maintain the Project Execution Plan, baseline schedule (Primavera P6 / MS Project), WBS, resource plan, risk & opportunity register and communication plan.

3. Lead and coordinate the multi-disciplinary project team (process, mechanical, piping, electrical, instrumentation & control, QA/QC, procurement and site personnel) through the engineering, procurement, fabrication, construction and commissioning phases.

4. Act as the single point of contact for the client, consultants, gas transporter / utility, turbine or engine OEM, vendors, sub-contractors and local authorities, ensuring that projects are executed on schedule and within technical specification.

5. Manage interfaces and tie-ins with upstream supply (gas transporter / utility custody transfer point) and downstream consumers (GT / engine fuel skid, boiler burner management system, plant DCS/SCADA), including formal interface registers and terminal point definitions.

6. Produce project management deliverables to client requirements, including progress reports (with S-curves and look-ahead), schedule updates, MDR/VDRL status, minutes of meetings, technical queries, deviation requests and close-out reports.

7. Chair or attend internal, client and vendor meetings (kick-off, design reviews, progress, FAT/SAT and handover meetings) and drive actions to closure.

B. Fuel Gas Metering & Fuel Gas Train Packages – Technical Ownership

8. Technical owner of the package design basis: gas composition and specification, flow turndown, pressure and temperature envelope, required metering class and uncertainty, and OEM fuel gas requirements (e.g. superheat margin above hydrocarbon and water dew point, Wobbe Index range, pressure stability, cleanliness and contaminant limits).

9. Oversee and approve key engineering deliverables, including PFDs, P&IDs, GA and isometric drawings, equipment and instrument data sheets, cause & effect charts, control narratives, hazardous area classification, and line, valve and instrument lists.

10. Review and own critical calculations: meter sizing and uncertainty budgets; pressure regulator and control valve sizing (Cv); relief and slam-shut set-point philosophy and relief valve sizing (API 520/521); Joule-Thomson cooling and gas heater duty; filter / separator sizing; pipe stress, wall thickness and velocity / noise checks.

11. Manage the integration of the fuel gas train: inlet ESD / isolation valves, filter-separators and coalescers, knock-out drums, gas heaters (electric, water-bath or shell-and-tube), pressure reducing / regulating stations (active-monitor regulators, slam-shut and creep relief valves), double block-and-bleed arrangements, vent and blowdown systems, and safety shut-off valves with valve proving where applicable.

12. Manage the metering system: selection and integration of ultrasonic, Coriolis, turbine, rotary/PD or orifice meters; flow computers; gas chromatographs for calorific value, density and Wobbe Index; moisture, H2S and hydrocarbon dew point analysers; sampling systems; and the metering supervisory system and SCADA/DCS/RTU interface (Modbus, OPC).

13. Ensure compliance with applicable codes and standards, including AGA 3/7/8/9/10/11, ISO 5167, ISO 17089, ISO 10790, ISO 6976, ISO 6974, EN 1776, EN 12186, EN 334, EN 14382, API MPMS Ch. 14 & 21, OIML R137, ASME B31.3/B31.8, ASME VIII, NFPA 85/86, IEC 60079 / ATEX / IECEx, and IEC 61508/61511 for SIL-rated functions, together with Malaysian requirements (Gas Supply Act 1993 and Gas Supply Regulations under Suruhanjaya Tenaga, PETRONAS Technical Standards (PTS), Petronas Gas / Gas Malaysia technical requirements, MS 930, DOSH and BOMBA requirements) or the local regulations of the project country.

14. Plan and witness inspection and testing: Inspection & Test Plans, material traceability, welding and NDT, hydrostatic / pneumatic and leak tests, meter calibration at accredited (ISO/IEC 17025) flow laboratories, flow computer and GC verification, loop checks, and Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT).

15. Lead site installation and commissioning: mechanical completion, pre-commissioning, nitrogen purging / inerting, first gas-in, regulator and slam-shut set-point verification, metering system validation, performance testing and support to GT / engine first fire, together with punch-list management, handover and as-built documentation.

16. Participate in and close out actions from HAZID, HAZOP, SIL / LOPA and constructability reviews; manage design changes through a formal Management of Change (MOC) process.

17. Owner of project engineering drawings, calculations and the technical document register, ensuring that the final data book / MDR (including calibration certificates, test records and O&M manuals) is complete and accepted by the client.

EDUCATION & PROFESSIONAL QUALIFICATIONS

Essential

1. Bachelor’s degree in Mechanical, Chemical, Electrical or Instrumentation & Control Engineering, or an equivalent qualification.

Preferred

1. Master’s degree in Engineering or Engineering / Project Management.

2. Project management certification (PMP, PRINCE2 or equivalent).

3. Professional Engineer registration with the Board of Engineers Malaysia (Ir.), Chartered Engineer, or eligibility for registration.

4. Recognised training in flow measurement (e.g. fiscal gas metering, ultrasonic or Coriolis metering), functional safety (TÜV FS Engineer / CFSE) or hazardous area competency (CompEx or equivalent).

SKILLS AND EXPERIENCES

Essential

1. At least 10 years of engineering and project experience in oil & gas, power generation, gas utilities or process industries, including at least 5 years as a Project Manager or Lead Engineer with full scope, cost and schedule accountability.

2. Proven end-to-end delivery of at least three similar projects from design through FAT, commissioning and handover.

3. Strong working knowledge of gas metering technologies: ultrasonic (multi-path), Coriolis, turbine, rotary / positive displacement and orifice / differential pressure meters. This includes their selection criteria, installation effects (straight-run lengths, flow conditioners), turndown, calibration and verification, diagnostics, and measurement uncertainty, together with flow computers, gas chromatographs and gas quality analysers under the relevant AGA / ISO / EN / API standards.

4. Strong working knowledge of pressure reducing and safety equipment: direct-acting and pilot-operated pressure regulators, active / monitor and working / standby stream configurations, slam-shut and creep relief valves, full-flow relief valves, control valves, ESD / safety shut-off valves, filter-separators and gas heaters. This includes sizing, set-point coordination, noise and Joule-Thomson effects, and maintenance considerations.

5. Familiarity with the major equipment manufacturers, their product ranges, lead times, documentation and after-sales support. The candidate should be able to evaluate competing vendor offers on a technical and commercial basis.

6. Ability to read, review and comment on P&IDs, GA drawings, isometrics, data sheets, cause & effect charts and vendor documentation, and to check engineering calculations.

7. Hands-on experience of FAT / SAT, site commissioning and gas-in activities on pressurised natural gas systems.

8. Proficiency in project scheduling and control tools (Primavera P6 or MS Project), Microsoft Office, and the ability to review AutoCAD / Plant 3D drawings.

9. Sound commercial acumen in contract administration, variation management and cost control.

10. Strong leadership, communication, negotiation and client-facing skills, with the ability to manage multiple stakeholders and resolve conflicts.

Preferred

1. Experience with fiscal / custody transfer metering systems accepted by gas transporters or regulators, including witness testing with third-party inspectors.

2. Experience of regulatory approvals in Malaysia (Suruhanjaya Tenaga, DOSH, BOMBA) and of working with Petronas Gas, Gas Malaysia or PETRONAS operating units under PTS, or comparable regulated markets in the region.

3. Familiarity with hydrogen-blended or alternative fuel gas readiness, biomethane / RNG injection, or LNG regasification send-out metering.

4. Knowledge of skid fabrication and modularisation, pressure equipment fabrication (ASME / PED), welding and NDT requirements.

Pay: RM7,500.00 - RM10,000.00 per month

Benefits:

  • Cell phone reimbursement
  • Free parking
  • Maternity leave
  • Professional development

Work Location: In person

重要安全守则

申请工作时,切勿提供您的银行或信用卡详细资料。不要转账或完成无关的在线调查问卷。如果您发现可疑内容,请举报此招聘广告。

了解更多