全职 Mechanical and Piping Engineer 工作, 薪水 up to MYR 6,000, Hammer Engineering Selangor 公司招聘中 - Ricebowl

Key Duties and Responsibilities

1. Engineering Design and Calculations

• Develop and review mechanical and piping designs, P&IDs, GA and piping layout drawings, isometrics, BOMs and datasheets in line with project specifications, client requirements and applicable codes (e.g. ASME B31.3 / B31.8, ASME VIII, API, ISO/EN).
• Perform engineering calculations including pipe wall thickness, pressure rating, flange and branch reinforcement, pipe support, pressure drop, flow and line sizing.
• Carry out or coordinate pipe stress and flexibility analysis (e.g. CAESAR II) and structural/skid checks where required.
• Select and specify piping materials, valves, fittings, flanges, gaskets, bolting and instruments; prepare piping material specifications and valve lists.
• Guide draughtsmen/designers and check drawings for accuracy, constructability, maintainability and compliance before issue.

2. Technical Procurement and Vendor Coordination

• Prepare technical specifications, material take-offs and requisitions for equipment, valves, piping and bulk materials.
• Conduct technical bid evaluations and clarify vendor queries; recommend technically acceptable suppliers.
• Review vendor drawings, calculations, certificates and data books for compliance with specifications.
• Participate in factory acceptance tests (FAT) and vendor inspections as required.

3. Fabrication and Construction Support

• Issue approved-for-construction drawings and resolve technical queries (TQs) from the workshop and site promptly.
• Work with Production on fabrication sequence, welding requirements, dimensional control and constructability.
• Review and support WPS/PQR, NDT, heat treatment and painting/coating requirements with QA/QC.
• Manage engineering changes, deviations and concessions through a controlled change process; maintain redline and as-built records.
• Support site surveys, installation, tie-ins, commissioning and troubleshooting when required.

4. Testing, Inspection and Documentation

• Prepare hydrostatic/pneumatic pressure-test packs, leak-test and valve-test procedures, and witness tests with clients and third-party inspectors.
• Prepare and control engineering documents: design basis, calculation reports, procedures, ITPs input, MDR/data books and as-built drawings.
• Ensure document revisions, transmittals and approvals follow the project document-control system.
• Coordinate with Professional Engineers, authorities and certifying bodies on submissions and approvals where required.

5. Quality, HSE and Continuous Improvement

• Ensure designs meet applicable codes, standards, statutory and client requirements, and company quality procedures.
• Participate in HAZOP, design reviews, risk assessments and model/3D reviews; incorporate safety-in-design principles.
• Participate in non-conformance reviews, root-cause analysis and corrective-action implementation.
• Identify opportunities to standardise designs, reduce material and fabrication cost, and improve lead time and quality.
• Develop and maintain engineering standards, templates, calculation sheets and lessons-learned records.

Education and Qualifications

• Degree in Mechanical Engineering or a related field (Diploma with strong relevant experience considered)
• Professional Engineer (PE) registration or progress towards it is an advantage
• Relevant training in piping design, pipe stress analysis, pressure vessels, or gas/oil & gas systems is an advantage

Skills and Experience

• At least 5 years of mechanical and piping engineering experience in oil & gas, gas distribution/metering, petrochemical, utilities or process-plant fabrication
• Working knowledge of piping and pressure-equipment codes and standards (ASME B31.3 / B31.8, ASME VIII, ASME B16 series, API 6D/598)
• Experience with skid-mounted packages, metering or regulating stations, valves and pressure testing is highly desirable
• Proficient in AutoCAD; experience with 3D design (e.g. AutoCAD Plant 3D, SolidWorks, Inventor) and CAESAR II preferred
• Able to prepare and interpret P&IDs, GA drawings, isometrics, BOMs, datasheets and vendor documents
• Good understanding of materials, welding, NDT, fabrication and construction practices
• Proficient in MS Office; familiarity with document-control and project systems
• Strong analytical, problem-solving, communication and report-writing skills
• Able to manage multiple projects to deadlines while maintaining safety, quality and cost discipline

Pay: RM5,000.00 - RM6,000.00 per month

Benefits:

• Cell phone reimbursement
• Free parking
• Professional development

Work Location: In person