- Pasir Ris East Region (Singapore) Singapore
全职 Quality Engineer 工作, 薪水 up to SGD 5,000, GRAND VENTURE TECHNOLOGY PRIVATE LIMITED East Region (Singapore) 公司招聘中 - Ricebowl
Quality Engineer
GRAND VENTURE TECHNOLOGY PRIVATE LIMITED
分享
保存
工作地点
职位描述
岗位职责
Job Responsibilities
Quality Assurance & Control:
Establish, implement, and maintain quality control plans for manufacturing processes and products.
Ensure compliance with quality management systems (e.g. ISO 9001, AS9100, ISO 13485, or equivalent).
Monitor product quality through inspections, audits, SPC, and process capability studies.
Review and approve inspection plans, control plans, work instructions, and quality procedures.
Lead root cause analysis and corrective/preventive actions (CAPA) using structured problem-solving methodologies.
Quality Lead for customer audits/visits, working with respective Production/Engineering Team to get all the documents and production shop floor ready for the audits.
Interpret technical drawing and analyze CMM inspection reports.
Perform measuring on critical dimensions of the parts by CMM, micrometer, vernier caliper, gauges, smart scope, roundness tester, microscopes etc.
Use of the Departmental Quality Systems, Smart QC, High QA and NCR module to perform day-to-day duties.
Generate Inspection Plans for Incoming, In-process and Outgoing Inspections.
Generate Work Instructions for inspection-related processes.
Perform First Article Inspection report and buyoff with the customers.
Perform Source Inspection with the customers as requested.
Process & Continuous Improvement:
Drive continuous improvement using Lean, Six Sigma, Kaizen, and other quality tools.
Analyze manufacturing data to identify trends, risks, and opportunities for quality improvement.
Support process optimization to reduce defects, scrap, rework, and customer complaints.
Participate in failure mode and effects analysis (FMEA) for new and existing processes.
Responsible for scheduled maintenance and calibration of measuring equipment, jig and fixtures.
New Product Introduction (NPI)/Engineering Support:
Support new product launches by ensuring quality standards are defined and met.
Participate in design reviews and ensure design-for-quality and manufacturability principles are applied.
Validate process changes and engineering updates to ensure compliance with quality requirements.
Generate Process Control Plan and FMEA with Engineering Team.
Responsible for maintaining Non-conforming Product Control (Reject Material Report) procedure. Analyze and review Reject Material Report (RMR) with Engineering/Production when non-conformance found. Work with Engineering/Production to resolve on any of the non-conformance found.
Audits & Compliance:
Plan and conduct internal audits and support external audits from customers, certification bodies, and regulatory agencies.
Ensure timely closure of audit findings and non-conformances.
Maintain documentation and records in accordance with quality standards and company policies.
Position Requirements
Education Requirements:
Minimum Diploma in Mechanical Engineering or related field
Experience Level Requirements
: 3 years of QC/QA experience in Precision Engineering, manufacturing environment will be preferred
Skills Desired:
Strong knowledge of manufacturing processes and quality methodologies.
Proven experience in a regulated or high-volume manufacturing environment.
Demonstrated track record in driving quality improvements and resolving complex quality issues.
Knowledge in Statistical Process Control (SPC) techniques such as Gage R&R, CPK, DOE will be advantageous.
Familiarity with statistical analysis and quality software tools.
Ability to interpret engineering drawings, specifications, and technical standards.
Strong analytical and problem-solving capabilities.
Excellent communication and stakeholder management skills.
Ability to work independently and manage multiple priorities effectively.
High attention to detail with a process-oriented mindset.
Grand Venture Technology (“GVT”) is a trusted manufacturing solutions and service provider for the semiconductor, analytical life sciences, electronics and other industries, with operations in Singapore, Malaysia (Penang) and the People’s Republic of China (Suzhou). Backed by an experienced management team, we serve some of the largest OEMs in these industries, by providing a range of engineering, assembly, testing and product lifecycle management services for the manufacture of complex precision machining and sheet metal components and modules.
Quality Assurance & Control:
Establish, implement, and maintain quality control plans for manufacturing processes and products.
Ensure compliance with quality management systems (e.g. ISO 9001, AS9100, ISO 13485, or equivalent).
Monitor product quality through inspections, audits, SPC, and process capability studies.
Review and approve inspection plans, control plans, work instructions, and quality procedures.
Lead root cause analysis and corrective/preventive actions (CAPA) using structured problem-solving methodologies.
Quality Lead for customer audits/visits, working with respective Production/Engineering Team to get all the documents and production shop floor ready for the audits.
Interpret technical drawing and analyze CMM inspection reports.
Perform measuring on critical dimensions of the parts by CMM, micrometer, vernier caliper, gauges, smart scope, roundness tester, microscopes etc.
Use of the Departmental Quality Systems, Smart QC, High QA and NCR module to perform day-to-day duties.
Generate Inspection Plans for Incoming, In-process and Outgoing Inspections.
Generate Work Instructions for inspection-related processes.
Perform First Article Inspection report and buyoff with the customers.
Perform Source Inspection with the customers as requested.
Process & Continuous Improvement:
Drive continuous improvement using Lean, Six Sigma, Kaizen, and other quality tools.
Analyze manufacturing data to identify trends, risks, and opportunities for quality improvement.
Support process optimization to reduce defects, scrap, rework, and customer complaints.
Participate in failure mode and effects analysis (FMEA) for new and existing processes.
Responsible for scheduled maintenance and calibration of measuring equipment, jig and fixtures.
New Product Introduction (NPI)/Engineering Support:
Support new product launches by ensuring quality standards are defined and met.
Participate in design reviews and ensure design-for-quality and manufacturability principles are applied.
Validate process changes and engineering updates to ensure compliance with quality requirements.
Generate Process Control Plan and FMEA with Engineering Team.
Responsible for maintaining Non-conforming Product Control (Reject Material Report) procedure. Analyze and review Reject Material Report (RMR) with Engineering/Production when non-conformance found. Work with Engineering/Production to resolve on any of the non-conformance found.
Audits & Compliance:
Plan and conduct internal audits and support external audits from customers, certification bodies, and regulatory agencies.
Ensure timely closure of audit findings and non-conformances.
Maintain documentation and records in accordance with quality standards and company policies.
Position Requirements
Education Requirements:
Minimum Diploma in Mechanical Engineering or related field
Experience Level Requirements
: 3 years of QC/QA experience in Precision Engineering, manufacturing environment will be preferred
Skills Desired:
Strong knowledge of manufacturing processes and quality methodologies.
Proven experience in a regulated or high-volume manufacturing environment.
Demonstrated track record in driving quality improvements and resolving complex quality issues.
Knowledge in Statistical Process Control (SPC) techniques such as Gage R&R, CPK, DOE will be advantageous.
Familiarity with statistical analysis and quality software tools.
Ability to interpret engineering drawings, specifications, and technical standards.
Strong analytical and problem-solving capabilities.
Excellent communication and stakeholder management skills.
Ability to work independently and manage multiple priorities effectively.
High attention to detail with a process-oriented mindset.
Grand Venture Technology (“GVT”) is a trusted manufacturing solutions and service provider for the semiconductor, analytical life sciences, electronics and other industries, with operations in Singapore, Malaysia (Penang) and the People’s Republic of China (Suzhou). Backed by an experienced management team, we serve some of the largest OEMs in these industries, by providing a range of engineering, assembly, testing and product lifecycle management services for the manufacture of complex precision machining and sheet metal components and modules.
重要安全守则
申请工作时，切勿提供您的银行或信用卡详细资料。不要转账或完成无关的在线调查问卷。如果您发现可疑内容，请举报此招聘广告。
了解更多