70 Product Development Jobs in Pulau Pinang - June 2026 - High Salaries

Showing 70 jobs results for "product development" in Pulau Pinang

Never miss any updates for Product Development jobs

Undisclosed

Prai

  • Performing PCB design schematic and layout reviews
  • Creating actionable recommendations based upon design reviews and simulation results
  • Guiding connector design and component qualifications from a signal integrity standpoint. ...
Posted
a month ago
Undisclosed

Malaysia

  • Performing PCB design schematic and layout reviews
  • Creating actionable recommendations based upon design reviews and simulation results
  • Guiding connector design and component qualifications from a signal integrity standpoint. ...
Posted
a month ago
Undisclosed

Prai

  • Make the engineering evaluation/proposal to the customer.
  • Create the detailed design including 2D/3D drawings and perform DFMEA/tolerance
  • analysis. ...
Posted
25 days ago
Undisclosed

Malaysia

  • Own yield learning for early silicon; identify systemic issues, propose fixes, and validate improvements.
  • Track and interpret yield trends across defectivity, structural, and parametric components.
  • Guide test content owners on pattern health, coverage gaps, and debug prioritization. ...
Posted
a month ago
Undisclosed

Malaysia

  • Develop correct test condition for memory product and define test flow for mass production testing needs.
  • Design and drive evaluation experiments for product quality and test yield improvement.
  • Drive test cost reduction by running test time analysis, optimizing test method while retaining good test coverage. ...
Posted
19 days ago
Undisclosed
  • Collaborate closely with software (embedded/application) and mechanical engineers to optimize system performance and cost
  • Conduct design verification, feasibility studies, and component selection/evaluation
  • Develop hardware design documentation and promote consistent design practices ...
Posted
22 days ago
Undisclosed

Malaysia

  • Masters/Degree in Electrical/Electronics Engineering, Material Engineering or related Engineering field
  • Must have good troubleshooting and debug skills
  • Ability toanalyze complex problems, multi-task and meet deadlines ...
Posted
14 days ago
Undisclosed

Malaysia

  • Perform failure analysis, co-work with design, device, product, and testing teams to figure out root cause and corrective actions to resolve issues observed.
  • Develop Data Analysis/Automation scripts compatible with our data platforms for analysis.
  • Demonstrate right mindset and leadership in advocating the principle of local ownership and global accountability. ...
Posted
a month ago
Undisclosed

Malaysia

  • Influences the shaping of future products by contributing to the framework (architecture) used across multiple products or systems.
  • Participates in designing, developing, and implementing effective methods of testing and troubleshooting systems and equipment for NPI phases of product development and manufacturing.
  • Provides multi-layered technical expertise for next generation initiatives. ...
Posted
a month ago
Undisclosed

Malaysia

  • Develop correct test condition for memory product and define test flow for mass production testing needs.
  • Design and drive evaluation experiments for product quality and test yield improvement.
  • Drive test cost reduction by running test time analysis, optimizing test method while retaining good test coverage. ...
Posted
a month ago
Undisclosed

Malaysia

  • Execute channel strategies, including business reviews, promotions, and joint initiatives to drive engagement and growth.
  • Promote product offerings by collaborating with internal teams and ensuring effective execution of campaigns, launches, and cross-selling activities.
  • Lead sales efforts for electrical products and solutions, identifying customer needs, proposing suitable technical-commercial solutions, and closing deals. ...
Posted
a month ago
Undisclosed

Bandar Perai Jaya

  • Supports pilot manufacturing line in the assembly, testing and evaluation of new products.
  • Collaborate with R&D team and participate in the design, qualification, and implementation of new test processes.
  • Develops and maintains systematic debug guide documentation for responsible products. ...
Posted
6 days ago
Undisclosed
  • Perform software and firmware version verification for production models to ensure smooth manufacturing execution.
  • Prepare and maintain production documentation including assembly instructions, work procedures, and process flow updates.
  • Oversee production line abnormalities, monitor testing equipment conditions, and coordinate preventive maintenance activities. ...
Posted
11 days ago
MYR6,000 - MYR8,500 Per Month
  • Mentor engineering leads and develop high-performance culture
  • Recruit and grow aggressive, execution-oriented engineering talent
  • Drive product development from concept to production ...
Posted
16 days ago

Actiforce Mechatronics Technology (M) Sdn Bhd

MYR3,500 - MYR5,000 Per Month
  • Work from home
  • Job Objectives:
  • To drive New Product Introduction (NPI) activities and Product Lifecycle Management (PLM) processes by coordinating cross-functional teams, ensuring on-time execution of NPI builds, managing engineering changes and Bill of Materials (BOM), and tracking issues to closure to support successful product launches and ongoing business needs during NPI phase. ...
Posted
16 days ago

AGENSI PEKERJAAN VERSATILE RISING SDN BHD

MYR5,000 - MYR8,000 Per Month
  • Conduct test validation, performance verification, and debugging activities to ensure machine stability, accuracy, repeatability, and compliance with specifications.
  • Develop and optimize test procedures, machine setup parameters, operating instructions, and technical documentation.
  • Analyze machine failures and test issues, perform root cause analysis, and implement corrective and preventive actions. ...
Posted
a day ago
Undisclosed

George Town

  • Data-Driven Problem Solving: Utilize data analysis skills, statistical tools, and Six Sigma methodologies to investigate test data, troubleshoot manufacturing bottlenecks, and optimize reliability.
  • Continuous Improvement: Connect the dots between product design, test data, and the manufacturing process to continuously improve overall product performance and manufacturability.
  • Education: Bachelor’s, Master’s, or Doctoral degree in Electronics Engineering or a related discipline. ...
Posted
18 hours ago
Undisclosed
  • Develop, review and monitor the effectiveness of quality control procedures and processes, propose and implement improvements where necessary.
  • Ensure closed loop of internal and external audit finding include product safety audit.
  • Monitor and supervise QMM technician performance to ensure efficiency in quality management process. ...
Posted
19 days ago
Undisclosed

Malaysia

  • Coordinate all positions related to hardware to complete the writing of hardware-related design documents;
  • Be responsible for the maintenance work after product mass production.
  • Responsible for the hardware and software adaptation of various models of BMC; ...
Posted
19 days ago
Undisclosed

Prai

  • Supports pilot manufacturing line in the assembly, testing and evaluation of new products.
  • Collaborate with R&D team and participate in the design, qualification, and implementation of new test processes.
  • Develops and maintains systematic debug guide documentation for responsible products. ...
Posted
19 days ago
Undisclosed
  • Develop, review and monitor the effectiveness of quality control procedures and processes, propose and implement improvements where necessary.
  • Ensure closed loop of internal and external audit finding include product safety audit.
  • Monitor and supervise QMM technician performance to ensure efficiency in quality management process. ...
Posted
19 days ago
Undisclosed

Bandar Perai Jaya

  • Supports pilot manufacturing line in the assembly, testing and evaluation of new products.
  • Collaborate with R&D team and participate in the design, qualification, and implementation of new test processes.
  • Develops and maintains systematic debug guide documentation for responsible products. ...
Posted
19 days ago
Undisclosed
  • Engineering Leadership
  • Lead and scale multidisciplinary engineering teams
  • Build engineering structure, workflows, and execution processes ...
Posted
19 days ago
Undisclosed
Posted
11 days ago

SANMINA-SCI TECHNOLOGY INDIA PRIVATE LIMITED

Undisclosed

Malaysia

  • Provide comprehensive engineering technical support for manufacturing, quality, and engineering issues across multiple product lines, driving continuous improvement in yield and quality through cross-functional issue resolution, root cause analysis, and optimization of processes, test coverage, and design.
  • To conduct structured On-the-Job Training consisting of technical shadowing, documented the procedures, and a phased handover of live project management to the successor to ensure all critical domain knowledge is successfully transferred.
  • Software Lifecycle Management process from customer design until factory deployment. ...
Posted
12 days ago
Undisclosed

Prai

  • Develop and execute finite element analysis models for mechanical components and assemblies in antenna systems.
  • Perform structural, thermal, vibration and fatigue analysis to validate antenna product designs against performance specifications.
  • Prepare comprehensive technical reports documenting analysis methodology, results, and recommendations. ...
Posted
21 days ago
Undisclosed

Malaysia

  • Develop and execute finite element analysis models for mechanical components and assemblies in antenna systems.
  • Perform structural, thermal, vibration and fatigue analysis to validate antenna product designs against performance specifications.
  • Prepare comprehensive technical reports documenting analysis methodology, results, and recommendations. ...
Posted
22 days ago
Undisclosed

Malaysia

  • Complete measurement system analysis for inspection systems and gages to be utilized for the project.
  • Review and analyze samples, quality issues and improvement actions during prototype making and CTAR/Qualification.
  • Coordinate sample preparation and certification for product verification and qualification testing. ...
Posted
18 days ago
Undisclosed

Prai

  • Support the complete product life cycle (Design updates, Creation of product specifications, 3D/2D modeling, Prototyping, Product testing, Product qualification, Project Execution & Sustaining till product end of life)
  • Work closely with PM and other cross functions in getting the right and clear requirements to make engineering evaluation/proposal to update the design.
  • Follow sustaining Project Process to support project team from PDE perspective to complete Project on time, quality and budget. ...
Posted
19 days ago

Job searches related to “Product Development”